System - D-Link DCS-6314 User Manual

Section 3: Configuration
In the System section, you may backup, restore, and reboot your camera. If you Restore Factory Defaults, you can use the Camera Installation
Wizard to reconfigure your DCS-6314. (Refer to page 26.)
Click on Save Configuration to save your current
Save To Local
Hard Drive: camera configuration as a file on your computer.
Load From Local Locate a pre-existing configuration by clicking
Choose File, then restore the pre-defined settings
Hard Drive:
to your camera by clicking Load Configuration.
Restore to You may reset your camera and restore the factory
settings by clicking Restore Factory Defaults.
Factory Defaults:
Click Reboot Device to restart your camera.
Reboot Device:
D-Link DCS-6314 User Manual

System

66