Deploying The Camera - D-Link DCS-6314 User Manual

Section 2: Assembly and Installation
Note: Before deploying the camera to a fixed location, it is recommended that you take a photo from the intended location to make
sure the camera will have an adequate field-of-view.
Step 1
Position the Alignment Sticker in the desired location making
sure the Camera and Wire-in-Bracket have sufficient space.
Use the dimension diagrams in
for reference.
Step 2
Use a 6mm drill bit to make required holes approximately
30mm deep.
Step 3
Remove the Alignment Sticker.
Step 4
Insert wall anchors and attach the mounting plate using the
screws provided.
D-Link DCS-6314 User Manual

Deploying the Camera

"Dimensions" on page 74
14