Section 3: Configuration
This Motion Detection Wizard will guide you through a step-by-step
process to configure your camera's motion detection functions.
Click Next to continue.
Step 1
This step will allow you to enable or disable motion detection, and
adjust the sensitivity of your camera's ability to detect movement.
Click on the radio button to specify whether the camera should
capture a Snapshot or a Video Clip when motion is detected.
Refer to
"Motion Detection" on page 50
configure motion detection.
Step 2
This step allows you to enable motion detection based on a
customized schedule. Click on Always to make sure your camera
always records whenever motion is detected. Otherwise, click on
From, and select the motion detection time schedule from the
drop-down list. Also indicate the day(s) you want motion detection
enabled by checking the corresponding boxes.
D-Link DCS-6314 User Manual
Motion Detection Setup Wizard
for details about how to
This UI element should be inside like the
other steps
38