D-Link DCS-6314 User Manual page 17

Section 2: Assembly and Installation
Step 3
Remove the mounting plate from the lower half of the camera
housing. It can now be attached to a wall or ceiling using the
mounting guide. See "Deploying the Camera" on page 14
for additional instructions.
If you will be routing the connection cables through a
wall or ceiling, it is recommended that you leave the cable
access panel attached, as it will help protect the cable from
vandalism.
If you will be installing the camera onto a surface that cannot
house the cable, the cable access part can be removed so
that the cable can exit the camera housing easily. Once the
mounting plate is removed, you will be able to remove the
cable access panel.
Step 4
Slide the lower half of the camera housing onto the mounting
plate and re-secure it. Make sure that the cable sheath extends
out of the base in such a way that the cable is not kinked or
twisted.
D-Link DCS-6314 User Manual 17