Explicitly Stated Requirements For The Toe - Belkin F1DN102C User Manual

Belkin® Secure DVI KVM Switch, Secure KM Switch and
Secure Windowing KVM EAL 4 augmented ALC_FLR.3 Security Target
6.2 Explicitly Stated Requirements for the TOE
This ST contains the explicitly stated requirement for the TOE as specified in Section 5.1.3 of the
claimed Protection Profile. It has been reproduced here:
EXT_VIR.1
Hierarchical to:
Dependencies:
EXT_VIR.1.1
Application Note: Does not require tactile indicators, but does not preclude their
presence.
EXT_IUC.1
Hierarchical to:
Dependencies:
EXT_IUC.1.1
EXT_ROM.1
Hierarchical to:
Dependencies:
EXT_ROM.1.1
Visual Indication Rule
No other components.
None
A visual method of indicating which COMPUTER is CONNECTED to
the shared set of PERIPHERAL DEVICES shall be provided that is
persistent for the duration of the CONNECTION.
Invalid USB Connection
No other components.
None
All USB devices connected to the Peripheral switch shall be
interrogated to ensure that they are valid (pointing device,
keyboard, and user authentication device). No further interaction
with non‐valid devices shall be performed.
Read Only ROMs
No other components.
None
TSF software embedded in TSF ROMs must be contained in mask‐
programmed or one‐time‐programmable read‐only memory
permanently attached (non‐socketed) to a circuit assembly.
Rev. 1.01
Page | 49