Ecommended Maximum Speeds; E Rror Codes; Ecommended Maximum Speeds For Attachment Hub - Varimixer V30 Operation Manual

r

ECOmmENdEd mAxImum SpEEdS

r

ECOmmENdEd mAxImum SpEEdS FOr ATTAChmENT huB

E :
rrOr COdES
If the mixer is overloaded, the motor will stop and
•
Allow the mixer to cool down.
•
After a short time, the display will change to normal mode.
•
The mixer can be started again. See also the section "Start-up after stop at high speed" on page 8.
:
MIN MAX
1 2 3 4 5
will be shown for 'overheat' in the display.
7