Page 2
EXPLODED VIEW No..Description ............................. Part No. 1..Control button, left and right ....................AR005-178-TZ005 2..Base ............................AR005-022-TZ002 2.1..Fuse 5 A, slow, 110V ........................AR005-418-00001 3..Cover plate ..........................AR005-347-TZ001 4..Cable with Rheostat and microswitchs ..................AR005-193-TZ001 5..Tilt Bearing, left and right ......................AR005-337-TZ001 6..Lid ............................
Putting your fingers in the bowl while the mixer is running may cause injuries. The mixer is listed by: Location: The mixer is to be placed on a stable and horizontal table. 4004730 Varimixer 14240 South Lakes Drive Charlotte, NC 28273 800 222-1138 www.varimixer.com mixer@varimixer.com ™TEDDY is a registered trademark belonging to A/S Wodschow &...
equipment: onneCtIon to power As standard the mixer comes with the following equipment: The enclosed cable must be used. • Bowl in stainless steel. • White plastic lid for bowl (lids in various colors are available). The mixer must be connected to ground! •...
peratIon of the mIxer axImUm CapaCIty of the mIxer The working capacity of the mixer depends of: The bowl must be mounted when the • The tool used. mixer is started! • Sort and quantity of the raw materials. • The optimum speed for a good result. Turn the rotary knobs to the locking symbol (fig. 3A). Too big quantities will always reduce the quality of the product and the life of the mixer.
aIntenanCe oUntInG of aCCeSSorIeS The mixer is equipped with an attachment hub with variable speed, The mixer requires no maintenance (motor and bearings for the and with the possibility of attaching the following equipment: mechanical parts are greased for life). •...
Need help?
Do you have a question about the TEDDY W5A and is the answer not in the manual?
Questions and answers