Data Communication; Ic Communication; Bluetooth Function - Docomo dragon quest sh-01f Instruction Manual

Data Communication

iC communication

Using iC communication
You can send and receive data with other devices equipped
with iC communication function.
Make initial setting of Osaifu-Keitai in advance (nP. 45 "Using
"Osaifu-Keitai compatible services"").
iC communication is not available during NFC/Osaifu-Keitai lock.
Data cannot be sent by iC communication in Airplane mode.
In the following cases, data may not be sent by iC
communication.
During charging
During earphone/microphone connection
During USB connection
You can send and receive phonebooks, My profile, bookmarks,
still pictures, videos, data recorded with the voice recorder, etc.
When using iC communication
■
Use while placing the a mark of the receiver's device over that
of the sender's device as shown.
Do not move the handset until sending and receiving of data are
completed.
There may be some cases in which data are poorly sent and
received or the screen is off by positioning the handset near
depending on the other party's device. In this case, put a
distance between the a marks apart/closer or move them up/
down or to the left/right.
Sending and receiving by iC
To enter authentication code is required for sending and
receiving all data items. The authentication code is a password
exclusive to iC communication. Before starting data
communication, the sender and receiver must enter the same
user-specified four-digit code. In addition, to enter passcode
may be required for sending all data items.
Sending data
■
Example: Still picture
1
In the home screen, [R]/[Contents
Manager]/[Photo]
2
Touch and hold a still picture/[Share]/[Send
by IC]
3
[Ok]
4
Place the a mark over that of the other party's
device
mark
Receiving data
■
1
Place the a mark over that of the other party's
device
2
[Accept]
3
Drag the status bar down/select received data

Bluetooth function

You can connect the handset to Bluetooth devices wirelessly.
Wireless communications with all the Bluetooth devices are not
completely guaranteed.
Specifications
■
Supported version
Bluetooth standard Ver.4.0
Output
Bluetooth standard Power Class 2
*2
Supported profiles
HSP: Headset Profile
HFP: Hands Free Profile
A2DP: Advanced Audio Distribution Profile
AVRCP: Audio/Video Remote Control Profile
HID: Human Interface Device Profile
DUN: Dial-up Networking Profile
OPP: Object Push Profile
SPP: Serial Port Profile
PBAP: Phone Book Access Profile
PAN: Personal Area Networking Profile
HDP: Health Device Profile
PXP: Proximity Profile
FMP: Find Me Profile
ANP: Alert Notification Profile
PASP: Phone Alert Status Profile
*17
TIP: Time Profile
*1 The handset and all Bluetooth function-installed devices have
ensured that they conform to the Bluetooth specification
according to the rules that the Bluetooth SIG defines, and are
all authenticated. However, operating methods might differ or
data might not be exchanged even when they are connected
wirelessly, depending on the features or specifications of
connected devices.
*2 Standardizes the communication procedures of Bluetooth
device per feature of a device.
*3 Connect a commercially available Bluetooth compatible
headset to the handset to talk wirelessly.
*4 Connect a commercially available Bluetooth compatible
hands-free device such as a car navigation system to the
handset to talk during hands-free operation using the car
navigation system etc.
*5 Connect a commercially available Bluetooth compatible audio
device to the handset to play music, TV audio, etc. wirelessly.
Also, remote control operation may be available from Bluetooth
devices. However, compatible devices may be limited
depending on the data type.
*6 Operate the handset from a commercially available input device
compatible with Bluetooth such as a keyboard and mouse by
connecting one to the handset via Bluetooth.
*7 Connect a Bluetooth compatible PC etc. to the handset via
Bluetooth to use the handset as a modem and make data
communications. Note that packet communication charges are
incurred.
*8 Connect a Bluetooth device to the handset with the file transfer
service to send and receive data between them.
*9 Set the virtual connection with a serial cable and interconnect
between devices.
74
*1
(Supported services)
*3
*4
*5
*5
*6
*7
*8
*9
*10
*11
*12
*13
*14
*15
*16
Data Communication