Display; Storage - Docomo dragon quest sh-01f Instruction Manual

Display

You can make settings for the screen display etc.
1
In the home screen, [R]/[Settings]/[Display]
2
Select an item
Wallpaper: Set an image for the home screen.
Welcome Sheet(lock
displayed when the touch panel is locked.
Screen edge effect: Set the effect on edges of the screen
shown when the display is turned on.
Brightness: For details nP. 64 "Brightness"
Screen timeout: Set the light duration of the backlight.
Quality mode: Make settings for the picture quality.
Auto-rotate screen: Set whether to switch the screen to
horizontal/vertical display when rotating the handset 90° to
the left/right.
Bright Keep: Set the display not to be turned off while holding
the handset with your hand and set the display to be turned
off immediately when placing the handset on a place parallel
to the ground.
Sweep ON: Make settings for Sweep ON.
Font Settings: Make settings for the text size or text font.
VeilView: For details nP. 64 "VeilView"
Daydream: Set whether to use the screen saver.
Display left percents of
percentage of the remaining battery level in the status bar.
[Welcome Sheet(lock screen)]
You can set it only when [Feel UX] is selected in Batch change
lock screen/ home application.
[Screen timeout]
Note that the continuous stand-by time is shortened when
increasing the light duration.
[Auto-rotate screen]
Auto-rotate screen may not follow the setting depending on the
app in use.
[Bright Keep]
If you do not move or operate the handset for a certain period of
time, the display may be turned off even while you are holding
the handset.
When you place the handset on a place parallel to the ground,
the display is turned off regardless of the setting of Screen
timeout.
[Font Settings]
Font may not appear correctly when activating an app
downloaded from Google Play etc.
Brightness
1
In the home screen,
[Display]/[Brightness]
2
Select an item
Outdoor view: Set whether to adjust brightness of the
backlight in a bright place.
Automatic brightness: Set whether to automatically adjust
brightness of the backlight. When not automatically
adjusting, set the brightness manually.
Eco backlight control: Save the electricity consumption of the
backlight by adjusting the quality of the display efficiently.
3
[OK]
[Automatic brightness]
Note that the continuous stand-by time is shortened when
increasing the brightness of the screen.
screen): Make setting for the screen
Battery: Set whether to display the
[R]/[Settings]/
[Eco backlight control]
The color may differ by adjusting the quality of the display.
VeilView
You can prevent others from seeing the display.
1
In the home screen,
[Display]/[VeilView]
2
Select an item
VeilView: Enable VeilView.
Switching by motion: Set whether to enable VeilView by
putting your hand over the upper part of the display side.
Pattern setting: Set the display pattern.
Improve appearance: Make an adjustment for how the
display looks like when it faces you.
[VeilView]
[VeilView] is disabled if the power is turned off.
[Switching by motion]
[VeilView] is enabled/disabled when you put your hand over the
upper part of the display side while the display is turned on.
Note that this function may also be operated in the following
cases.
When the upper part of the display side is covered while you
are carrying the handset in a bag, pocket, etc.
When you put the handset with the display side turned down
When you place an object on the upper part of the display
side
This function may not be operated on horizontal display, during
a call, etc.
[Pattern setting]
The effect of preventing others from seeing differs depending
on the selected patterns.

Storage

You can check the available space on a microSD Card, the
handset, etc., manage the backup, etc.
1
In the home screen, [R]/[Settings]/[Storage]
2
Select an item
Mount microSD/Unmount
microSD Card.
Erase microSD: Format the microSD Card.
Unmount USB memory: Unmount the USB memory.
File Management: Manage data saved on the USB memory.
backup: For details nP. 61 "microSD backup"
microSD
Precautions about inserting and removing a microSD Card are
displayed every time the handset power is turned on.
[Mount microSD], [Unmount microSD]
Unmount the microSD Card and turn off the power before
inserting/removing the microSD Card.
[Erase microSD]
Note that all the data on the microSD Card will be deleted when
formatted.
[Unmount USB memory]
Unmount the USB memory before removing it.
64
[R]/[Settings]/
microSD: Mount/Unmount the
Handset Settings