Camera - Docomo dragon quest sh-01f Instruction Manual

4
[SET]
Depending on usage of the handset, available space on the
handset memory or a microSD Card, the program type, etc.,
you may not be able to watch/record the program or recording
may be stopped even if it is not finished yet.
Setting TV (Full-Seg/1Seg)
You can make settings for displaying subtitles, data
broadcasting, auto exit time of TV, etc.
1
In the TV watching screen, [z]/[General
settings]
Controller display position: Set the controller to be displayed
on the left/right side.
One-Seg/Full-Seg reception
1Seg/Full-Seg.
Text superimpose display: Make settings for telops.
Audio settings: Make settings for the sound quality.
Data broadcasting settings: Make settings for data
broadcasting.
Alarm settings: Make settings for the alarm activated when a
reserved program starts.
TV off timer: Set how long TV will remain activated before it
automatically ends.
Web browser settings: Make setting for the browser.
Full-Seg destination
Full-Seg.
Initialize CAS information: Reset information saved when
receiving Full-Seg.
Product information: Confirm the version of this app.
[Data broadcasting settings]
When [Confirmation] is disabled, the confirmation screen for
data broadcasting does not appear and information of data
broadcasting/data broadcasting websites may be automatically
updated. Note that packet communication charges may be
incurred.
[TV off timer]
When the set time arrives while you are recording TV, the
confirmation screen for ending the recording is displayed.
Video/Audio/Subtitles settings
■
You can set subtitles to be displayed or change spoken language
while watching TV.
Some functions may not be available depending on the program.
1
In the TV watching screen, [z]/[Video/Audio/
Subtitles]
2
Select an item
Switch videos: Switch images.
Switch audio: Set spoken language.
Switch sound-multiplex: Make settings for main/sub audio
channel.
Switch subtitles: Make settings for subtitles to display.
setting: Set how to receive
setting: Set where to save recorded

Camera

Before using camera
Fingerprints or fat on the lens may cause the image to be out of
focus. In addition, images may blur, rays of light may appear in
images when shot near a strong light source, etc. Wipe the lens
with a soft cloth before shooting images.
You cannot shoot when battery level is insufficient. Images may
appear dark or distorted when shot with insufficient battery power
even while the handset is charging. When you use the camera,
charge the battery sufficiently in advance.
Although the camera is made with high-precision technology,
some pixels or lines look constantly dark or bright. Further, white
lines and other noise may appear in images especially when
shooting images in dimly lit surroundings.
The quality of images may deteriorate when shot or saved after
the handset has been left in a warm location for a long time.
If the camera lens is exposed to direct sunlight for a long time,
the internal color filter may discolor, creating a discoloration of
shot images.
Images shot in shooting conditions which include strong light
source such as the sun or a lamp may appear dark or distorted.
Shooting the sun directly may damage the performance of the
CMOS.
In the following cases, the handset may become warm and the
camera may end. This is not a malfunction.
When shooting still pictures continuously
When shooting long videos
When activating the camera for a long time
Use the camera again after a while.
When Focus settings are switched, sounds are heard from the
camera lens. This is not a malfunction.
Images are blurred when the handset moves while shooting
images. Hold securely to prevent blurring. Use the shake
reducing function when shooting still pictures.
The color and brightness of the subject in images shot with the
camera may differ from the actual color and brightness.
Make sure that your fingers, hair, handset strap, etc. do not
obscure the camera lens when shooting images.
Because a larger picture size requires more data, movement in
the image on the handset display may appear slow.
Indoor fluorescent lighting may create flickering or streaky
shading on the screen. This flickering or shading may be reduced
by changing the lighting conditions and brightness of the room or
adjusting the camera brightness and white balance.
Shot still pictures are saved in DCF1.0 (ExifVer.2.3, JPEG)
format.
The camera is not available while watching Mobacas or TV.
51
Apps