Battery & Energy Saving; Useful - Docomo dragon quest sh-01f Instruction Manual

USB connection
Change the settings for connecting the handset to a PC using
Micro USB Cable 01 (sold separately).
1
In the home screen,
[Storage]/[z]/[USB connection]
2
Select an item
MTP mode: This is a mode for transferring data to the
handset memory or a microSD Card using a PC compatible
with MTP.
PTP mode: This is a mode for transferring still picture to the
handset memory using a PC compatible with PTP.
Card reader mode: This is a mode for using microSD Card
inserted into the handset as external memory for a PC.
When you transfer a great deal of data, the transference may
be interrupted. In this case, split the data and transfer it.
Battery & energy saving
You can activate Energy saving settings or Energy save
standby, check the battery level, etc.
1
In the home screen, [R]/[Settings]/[Battery
& energy saving]
2
Select an item
settings: For details nP. 65 "Energy saving
Energy saving
settings"
standby: For details nP. 65 "Energy save
Energy save
standby"
Battery: Visually check changes in the remaining battery
level, battery consumption level, etc.
Energy saving settings
Activate Energy saving settings. You can also set to switch to
Energy save according to the battery level and the time.
1
In the home screen, [R]/[Settings]/[Battery
& energy saving]/[Energy saving settings]
2
Set
1 Energy save
Switch to Energy save.
2 Edit
Set the functions to save energy for individually such as
Energy saving standby and Energy saving Wi-Fi.
3 Switch by batt.
Set whether to switch to Energy save when the battery
level reaches the specified level.
4 Battery level to switch
Set the battery level to switch to Energy save at.
5 Switch time
Set whether to switch to Energy save when specified time
arrives.
[R]/[Settings]/
When [Energy save] is enabled by Switch by batt., [Energy
save] is not disabled even when the time set for Switch time
arrives.
When the battery level exceeds the battery level to switch after
[Energy save] is enabled by Switch by batt., [Energy save] is
disabled.
When [Energy save] is enabled by Switch by batt., [Energy
save] is not disabled even if [Switch by batt.] is disabled.
When Energy saving standby is set to [ON], it controls the apps
that operate in the background while the display is turned off.
The apps that communicate periodically may not start the
communication even if Energy saving standby is set to [OFF]. In
this case, set the corresponding app again.
When Energy saving Wi-Fi is set to [ON], some apps may not
be able to connect to the other party's devices properly.
Energy save standby
You can control the apps that operate in the background while
the display is turned off.
1
In the home screen, [R]/[Settings]/[Battery
& energy saving]/[Energy save standby]
2
Set
1 Eco standby
Switch to Eco standby.
2 Edit
Set apps to control.
3 Battery usage status
Visually check changes in the remaining battery level,
battery consumption level, etc.

Useful

You can make settings for Grip sensor/Touch Panel/Recent
Apps key or perform Self check or Initial setting.
1
In the home screen, [R]/[Settings]/[Useful]
2
Select an item
sensor: For details nP. 65 "Grip sensor"
Grip
Touch Panel: Set whether to use Air Operation or Air Zoom.
Recent apps key: Set a function to use when you touch
[}]. For details nP. 16 "Operation while using function"
check: For details nP. 66 "Self check"
Self
setting: For details nP. 21 "Initial setting"
Initial
Grip sensor
You can make settings for Grip sensor.
1
In the home screen,
[Useful]/[Grip sensor]
2
Slide [OFF] to the right
65
[R]/[Settings]/
Handset Settings