Receiving A Call - Docomo dragon quest sh-01f Instruction Manual

[Calling Method]
When calling to a land-line phone: 010/country code/area
code (city code)/the other party's phone number/[0]
When calling to a mobile phone: 010/country code/the other
party's phone number/[0]
･ As for the other parties' phone numbers and area codes (city
codes) that begin with "0", omit the first "0" when entering
(except some countries or regions such as Italy).
･ Alternatively, enter "009130-010" as usual or "+" instead of
"010".

Receiving a call

1
When a call is received, the ringtone sounds
and the incoming lamp flashes
Incoming lamp
2
Receive the call
: Operate after touching [Activate].
1 Reject call with SMS
You can reject an incoming call and send a selected SMS
message to the other party.
2 Reject
You can reject the incoming call.
3 Accept
You can receive the call.
3
[End] to end the call
Placing a call on hold
■
1
When a call is received, the ringtone sounds
and the incoming lamp flashes
2
[z]/[On hold]
Answering by answering memo
■
1
When a call is received, the ringtone sounds
and the incoming lamp flashes
2
[z]/[Absence Memo]
Playing an answering memo
1
In the home screen, []]/[z]/[Call settings]
2
[Call/Ans Memo]/[Answering Memo
select an answering memo
Operation during a call
You can carry out operations such as using a hands-free call
and adjusting the in-call volume according to the using
condition during a call.
1 Add call
Place a current call on hold and make a call to another party.
2 End
End a call.
3 Dialpad
You can enter touch-tone signals.
4 Hold
Hold/Unhold a current call.
If you have added a call, [Switch] is displayed. Touch it to
switch to whom you talk.
5 Mute
Enable or disable mute setting on a current call.
6 Speaker
You can talk with hands-free.
When a Bluetooth device is connected, you can switch sound
emitting parts.
* Subscription to Call Waiting Service is required.
Note the following to use hands-free.
･ Speak approximately 20 to 40 cm away from the mouthpiece.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
･ When calling outdoors, in a location where surroundings are
noisy and where the sound echoes loudly, use an earphone/
microphone.
･ If the sound breaks up during a hands-free call, lower the
in-call volume.
■ Adjusting the in-call volume
1
[x]/[y] during a call
2
[+]/[-]
: Alternatively, touch [x]/[y] to adjust the volume.
3
[Close]
Using Noise suppression
■
When Noise suppression is set to [ON], you can measure ambient
noises using the out-microphone and communicate by making your
voices sound clear during a call.
1
[x]/[y] during a call
2
[OFF]/[ON] of Noise suppression
3
[Close]
Noise suppression processes voices to make conversations
sound clear. Sound quality may vary depending on the
surrounding noises and the tone of the voice.
List]/
When using Noise suppression, make sure not to cover the
hole of the out-microphone and move the mouthpiece as close
to your mouth as possible for speaking.
Using Slow Talk
■
When Slow talk is set to [ON], the speed of the other party's voice is
slowed down during a call and you can hear the voice well.
1
[x]/[y] during a call
2
[OFF]/[ON] of Slow talk
3
[Close]
33
*
Call