Character Entry - Docomo dragon quest sh-01f Instruction Manual

If the proximity sensor is covered with a hand, an object, etc.,
the clock is not displayed to prevent inadvertent operations.
■ Showing lock screen
You can turn the display on by holding the handset while the
display is turned off.
Set Operation when you hold the phone to [Show lock screen]
and set Screen lock to an item other than [None] in advance
(nP. 65 "Grip sensor", P. 67 "Lock & security").
If the proximity sensor is covered with a hand, an object, etc.,
the display cannot be operated by touching to prevent
inadvertent operations although the display is turned on. Also,
the display may be turned off regardless of the setting of the
handset.
Even if Screen lock is set to [None], the display is turned on
although the lock screen is not displayed.
Volume down for incoming calls
■
You can minimize the ringtone/alarm volume and activate the
vibrator by holding the handset during an incoming call or while the
alarm of the "Alarm/Clock" app is ringing.
Enable [Volume down for incoming calls] in advance
(nP. 65 "Grip sensor").
Volume down for incoming calls is not available when
KisekaeCall is set.
Deterrence rotate screen
■
You can keep the screen displayed vertically while holding the
handset.
Enable [Deterrence rotate screen] in advance (nP. 65 "Grip
sensor").
Searching information on the handset and
websites
1
In the home screen, [R]/[Google]
: If the confirmation screen for Google Now is displayed, check
the content, follow the instructions on the screen and operate.
: Quick search box appears.
2
Enter the keyword
1 Search box
Enter the keyword to search with.
When the keyword is entered, apps, data, etc. whose
names start with the entered characters are searched
and displayed as a list.
2 Switch to Voice Search
3
Select the search result
: When a search result is an app, the corresponding app is
activated.
: If [Images] etc. is displayed, you can search by selecting a
genre.
: When you cannot see search results hidden behind the
keyboard, touch [v] to close the keyboard.
Search settings
■
1
In the quick search box, [z]/[Settings]
2
Select an item
Voice: Make settings for the voice input.
Phone search: Set the range for subjects to search.
Privacy & accounts: Make settings for the privacy and
accounts such as histories and Location services.

Character entry

Keyboard layouts
Following operations describe how to enter characters by using
iWnn IME - SH edition.
You can use the following two types of the keyboards.
QWERTY
keyboard
12 keyboard
※ Each key may change depending on the settings and the
condition.
1 Shift key
Touch to switch between upper/lower case letters etc.
･ When [*] is displayed, lower case letters are entered. When
[+] is displayed, the first letter to be entered becomes upper
case one. When [,] is displayed, upper case letters are
entered.
･ Symbols that can be entered change when you switch the
upper/lower case letters.
2 Input mode switching key
Touch to switch input modes.
･ Touch it to switch input modes in the order of hiragana/kanji
b half-width alphabet b half-width numeric. The keyboard
set in each input mode is displayed.
･ Alternatively, slide the input mode switching key to the right
to switch input modes.
3 Delete key
Delete characters displayed in a direction set in Delete key
behavior.
4 Enter key
Insert a line feed.
Determine the entered characters.
Execute operations entered in an entry field such as the
search box.
Move to the next entry field.
Touch and hold to close the keyboard.
18
You can enter a displayed character by
touching the character entry key. Use
romaji for entry.
Several characters are assigned to one
character entry key. Characters are
switched every time the key is touched.
You can enter characters by flicking a
character entry key up/down or to the
left/right.
QWERTY keyboard
12 keyboard
Before Using the Handset