Vitek VT-4002 SR Manual Instruction page 10

ENGLISH
Press Play to return to the normal rate.
Fast forward (FF)
During DVD, CD or VCD playback press FF to start fast forward
winding. The player will wind the disk with rate which is 2, 4, 8, 16 or
32 times more than normal rate in the specified order:
Press Play to return to the normal rate.
Mute
Press Mute to turn off the sound. Press the button once again to
return to the normal volume.
R/L
During VCD/SVCD playback press several times R/L to select audio
output channel: Stereo/ Left/ Right.
Repeat
The repeat mode will switch over every time you press Repeat.
There are three repeat modes: repeat chapter, repeat title and return
to the normal playback.
А В
During DVD playback, press A B to select A as an initial point.
Press the button once again to select B as an end point. The player
will repeat the А В length automatically.
Press А В the third time to stop repeating the А В length and erase
the initial and the end points.
Notes: During CD/ VCD/ SVCD playback А and В points shall be within
one truck. During DVD playback А and В points from different
chapters can be selected.
RAN
During the playback of dick containing a lot of trucks press RAN
to instruct the player playback them in random but not sequential
order.
During playback, press RAN to select the mode of random playback:
random playback ON, random playback OFF.
Setup
Press Setup to enter the Setup menu.
Erase
Press Erase to erase the entered digits.
Press the button once to erase one symbol and press the button and
hold down to erase all digits.
Pause
During playback press Pause to stop playback.
Press Play to return to the normal playback.
Play
If the player is not stopped press the button to start playback.
Stop
During playback press Stop once to stop playback and keep in
memory the stop point.
Press Playback to start playing from the stop point.
Press Stop two times to stop playback completely.
Notes: If the playback has been stopped for more then 5 minutes the
screensaver will be automatically switched on.
Menu
Press Menu to enter the main menu.
Repeat
Press the button to repeat playing for the selected item. If during
the playback of DVD disk press Repeat 1/ all the screen shows the
following: Repeat: [Off], Repeat: [Chapter], Repeat [Title].
During SVCD/ VCD/ CD playback the screen shows the following:
(The function is available only if РВС is switched off.)
Repeat: [Repeat off], Repeat [Repeat one], Repeat: [Repeat all].
Step
Press STEP to stop normal playback and move the picture one frame
forward.
Notes: The step by step playback function is not available for CDs.
Downloaded From DvDPlayer-Manual.com Vitek Manuals
4002IM_new.indd 10 4002IM_new.indd 10
Zoom
During VCD/ SVCD/ DVD playback press Zoom to increase the
picture as follows:
N/P
Press the button during stop to switch over the DVD player system
(Automatic selection, PAL or NTSC). The system will switch over
every time you press the button.
Vol
Press Volume + to reinforce sound.
Press Volume to reduce sound.
Angle
Press Angle to watch the movie from different angles.
Press Angle several times to switch over between cameras.
Notes: This function is subject to the disc.
Subt
During DVD playback press Captions to select one of available
languages for Captions. The number of languages is up to 32.
Notes: This function is subject to the disc (various languages).
GOTO
During VCD playback press GO to display the following menu:
Select time, a track with Up/Down buttons.
Enter the required time and truck with digit buttons and press Enter
to confirm.
During DVD playback press GO to display the following menu:
Select time, a title or a chapter with Up/Down buttons.
Enter the required time, title or chapter with digit buttons and press
Enter to confirm.
Notes:
1) If time is entered there will be step to the precise time of the truck.
2) If the truck is entered the required title or chapter will be searched.
3) The function is not available for some DVD disks.
Program
During VCD playback press Program to display the following
[Programs] menu:
Enter numbers of trucks in the required order. After all select the
[playback the program] item and press Enter to playback trucks in
the programmed order. Select [clear all] item and press Enter to
erase all entered numbers.
During DVD playback press Program to display the following
10
20.08.2009 12:38:55 20.08.2009 12:38:55