Dab Operation; Station Tuning - Blaupunkt RX+ 10 Instruction Manual

RX+ 10
Ensemble/Station name/Multiples
A multiplex/ensemble is a collection of radio stations that are bundled and
transmitted on one frequency. There are national and local multiplexes.
Local ones contain stations that are specific to that area e.g. MXR West.
NOTE: DAB-unlike normal radio, groups together several radio stations
and transmits them on one frequency.
DLS (Dynamic Label Segment)
Dynamic label segment is message that the broadcaster may include with
their transmissions. It usually includes the information like music style,
etc.
Radio text
As with DAB, the broadcaster can include the station text that displays the
information about the current program.
If radio text information is not available, it will display: No Text.
If the RDS (radio data system) is available, it will show the station
information provided by the station.

DAB OPERATION

Scan stations
When turning on to DAB mode, the unit will automatically scan the
stations it found in this area.
1. Press and hold the SCAN button to scan the stations. It stops scanning
after it has finished scanning and starts to play the first station it founds
after you switch on for the first time.
2. Press / button to select the previous or next stations, and press
ENTER button to activate to play the station.

Station tuning

Press and hole the MENU button, when the <Station scan> appears, press
ENTER, then use the
<Full scan>, <Manual tune>.
*Select the Full scan, and press ENTER to enable a full scanning.
*Select the <Manual tune> and press ENTER, use
station from 5A:174.928MHz to 13F:239.200MHz. Then press ENTER
button to activate the selected station.
/ button to cycle through the scanning options:
53
/ button to select