Option Setup; D Maintenance Firmware Update - Denon POA-3012CI - Multi-Zone Audio Distribution Power Amplifier Owner's Manual

ENGLISH
•
)j:
kt
<,
':'Q~lrti9"
;t
Updating failed
Updating failed.
Login failed
Failure to log into server.
Server is busy Server is busy. Wait a while then try again.
Connection fail Failure connecting to server.
II
fjl1Jlware
Update
UPdate
the'firmware
of the
multi channel power amplifier.
Update Check
You can check for firmware updates. You can also check approximately
how long it will take to complete an update.
Execute the update process.
When updating starts, the power indicator lights red. "Updating
* * *"
is shown on the display during updating. Once updating is
completed, "Updatingcomplete" is displayed.
"Latest firmware" is displayed when the firmware is the latest
version.
' * '
If the display reads as shown below, check the settings and network
environment, then update again.
Update Start
.~(.ji.
• Connection to the network and specific settings are required to
update the firmware. For details, see page 8, 15.
• Do not turn off the power until updating is completed.
• Normally there is no need to use this function, aside from the cases
described below.
, The Firmware Update function is only used for updating the
firmware (free or for a charge) via the Internet, for example for the
purpose of adding functions to the POA·3012CI in the future.
· Information regarding the Firmware Update function will be
announced on the DENON web site each time related plans are
defined.
· A broadband connection to the Internet is required to use this
function
(rF'
page 8).
· Even with a broadband connection to the Internet, approximately
13 min is required for the updating procedure to be completed.
Once updating starts, normal operations on the POA-3012CI cannot
be performed until updating is completed.
Furthermore, updating the firmware may reset the backup data for
the parameters, etc., set for the POA-3012CI.
~
button:
\l button:
ZONE 6
button:
ZONE 5
button:
DISPLAY
button:
@
Use the following buttons to input the proxy server address or
domain name and press the
SELfCT/ENTER
knob.
' *
Button functions when entering address
SELfCT/ENTER
knob: Turn .. · ·Select
Press · ·.. ··Confirm
Cursor to right
Cursor to left
Setting during address entry
Cancel entry
Character insert/delete/overwrite
Cursor ~: Character insert
Cursor
~:
delete
Cursor.: overwrite
When "Address" is selected in step
®:
Input the address
When "Name" is selected in step
®:
Input the domain name
®
Turn the
SELfCT/ENTER
knob to select the "Port" and press
SELfCT/ENTER
knob.
®
Use the above buttons to input the proxy server port number and
press the
SELfCT/ENTER
knob.
(J)
Press the
SELfCT/ENTER
knob.
Setup is complete.
.M,intenan~L
' .
Thj!) ;,5ets:' the
function for
maint~nance by'
a DENQN
' .
s~ivic~~rson'or instalter~
(For professJorjal use only.) , .
This function allows a DENON serviceperson or installer to check the
POA-3012CI's status and make settings via the Internet.
'N'O*
Only use this function if so instructed by a DENON serviceperson or
installer.
.c::
*
F' ,-. ,-, ' , ., .....
~r------------.
~ _.Iid,~ ~-.;..;:;;:.=: _ ~
I- •
=--=~~"="='-a--------'
®
Selecting the
input method
Example) Address
@
Input the
address
or domain
name.
o
Proxy settings
Make this setting when connecting to the Internet via a proxy server.
:+: t·~
e
1::
i.•
J 0
~-.
k Set
U F-
CD
Select MProxy·.
I••
""-...:~",:",j:,-=:,-=,;-",~-"":-,,,::-,,,:-,,-:-,-}
-----'
[Characters that can be input]
a
~~ O~9;
"';::}:i,:f..,>;:,>!,<
.0< . . .:
.·~;::,':'!.·Jl·
tt':JJ.i.:'fi:1
~ nJl~.a.s.e).
®
Input the port
number.
CD
Select menu "Network Setup" - "Network Setup" - "Proxy" and
press the
SELfCT/ENTER
knob.
<1>
Turn the
SELfCT/ENTER
knob to set "Proxy" to "ON" and press
the
SELfCT/ENTER
knob.
The proxy server is enabled.
®
Turn the
SELfCT/ENTER
knob to select the proxy server input
method. and then press the
\l
button.
[Selectable items]
AddrllSS :
Select when inputting by address.
Name :
Select when inputting by domain name.
<>:,:".J,;=~~"""
16