Centrifugal Clutch - Husqvarna 50 Workshop Manual

Downloaded from www.Manualslib.com
7
Disassembly
Remove the spark plug and thread the piston stop P/N
5025033-01 into the spark plug opening in the cylinder.
Rotate the clutch clockwise by hand until the piston
contacts the piston stop. The clutch hub has left-hand
threads. Loosen the clutch hub in a clockwise direction
and remove the clutch.
Slide the clutch drum with drive sprocket, needle bearing
and washer from the crankshaft. Clean the parts.
manuals search engine
Centrifugal
Clutch
NOTE !
Make sure that the piston stop is threaded
completely into the cylinder.