Husqvarna 50 Workshop Manual page 15

Assembly
New starter rope length is 88 cm (34.5 inches). Tie a
knot in one end of the rope. Insert the other end through
the rope pulley first, then through the rope eyelet in the
housing and the starter grip.
Tie the rope at the starter grip end with a double loop
knot.
Install the new recoil spring cassette into the housing.
Lubricate the starter post with cold-resistant grease.
Wind 3 turns of the starter cord in a clockwise direction
onto the pulley. Install the rope pulley, washer and
retaining screw.
Downloaded from www.Manualslib.com manuals search engine
5