Husqvarna 50 Workshop Manual page 26

Downloaded from www.Manualslib.com
7
On models equipped with a floating rim sprocket,
carefully examine the rim sprocket and the sprocket
splines on the clutch drum. On models equipped with a
spur sprocket, check for saw chain drive link wear
grooves around the spur sprocket on the clutch drum.
An excessively worn rim or spur sprocket will cause
premature wear of a new chain. Exchange any
questionable components.
Assembly
Assemble the centrifugal clutch spring by hooking the
ends together. Position the hooked ends of the spring in
the middle of a shoe then fit the shoe and spring to the
clutch hub.
Secure the clutch hub in a vise. With the assistance of a
screwdriver and a pair of pliers, lock the remaining clutch
shoe so that the spring groove is exposed, then install
the spring.
manuals search engine