Specifications - Blaupunkt BB5WH Owner's Manual

BB5WH
Skip to the Previous/Next Folder (MP3/USB)
1. During playback, press and hold the FOLDER/10+ button until the folder number flashes on the screen.
2. Press the SKIP/SEARCH DOWN button or SKIP/SEARCH UP button to select the folder you want.
3. Once the selected folder number shows on the screen, press the FOLDER/10+ button to confirm.
Repeat Playback (CD/MP3/USB)
During playback, press the PROG/MEM/MODE button to repeat play a single track; press the button twice to
repeat play all tracks; press the button three times to enter the introduction play mode; press the button four
times to enter the random play mode; press the button five times to exit.
Programmed Play (CD/MP3 DISC/USB)
1. At stop mode, press the PROG/MEM/MODE button once, the programs icon shows with a program
sequence indication "P01" first, then a track number flickers on the LCD with the programs icon.
2. Select the first track to be programmed using the SKIP/SEARCH UP button or the SKIP/SEARCH DOWN
button, and then press the PROG/MEM/MODE button again to store and advance to the next
programming step (If there are several folders on the MP3 disc or USB, it is necessary to program folders
first and then the tracks. The method of the folders programming is the same as the tracks programming.).
3. Repeat the above steps to program more tracks. A maximum of 20 tracks for CD and 99 tracks for MP3
disc/USB can be programmed in memory in a preferred order. If the memory is full, the screen will show
FUL for indicating.
4. Press the PLAY/PAUSE/CH+ button to begin programmed play in the preferred order after you are done
with programming. The player stops automatically after all programmed tracks are played.
5. You may press the STOP/CH- button to terminate programmed playback. In program stop mode, press the
PLAY/PAUSE/CH+ button to begin the programmed playback with the programming order identical with
the previous one done; press the STOP/CH- button again to clear the programming.
AUX IN
1. Connect the Aux in jack on the unit to an audio source, for example, MP3 player with an audio cable.
2. Power on the unit following the corresponding instructions.
3. Press the SOURCE button repeatedly to switch to AUX mode.
4. Use the native controls on the connected audio device to begin playing music through the connected
unit.
STEREO PHONE JACK
A stereo phone jack has been provided on the back side of the player so that you can listen without
disturbing others. To use this jack, plug in the headphones/earphones (NOT INCLUDED) and adjust the
volume level to a preferred level.
NOTE: When external headphones/earphones are connected, the speakers will be muted.
CAUTION: Listening at high power for a long moment could damage users' ears.

SPECIFICATIONS

Output power: 1.2 Watt x 2 @10%THD
PLL FM radio: 87.5~108 MHZ
USB: USB 2.0 version
Standby power consumption: <0.5 Watt
Power supply: DC 9V/1A
Battery power supply: UM2 x 6 ( Not include).
9