Table of Contents
Advertisement
Enjoying video and sound in
another room using a TV or
another amplifier (HDMI zone)
1
Connect another amplifier or
TV in other room (page 32).
2
Turn on the receiver in main
zone, the amplifier and TV in
HDMI zone.
3
Set the assignment for the
HDMI OUT B/HDMI ZONE jack
to [Zone].
Press HOME, then select [Setup] – [HDMI
Settings] – [HDMI Out B Mode] – [Zone].
4
Press HOME, then select [Zone
Controls] – [HDMI Zone] –
[HDMI Zone Power] – [On].
You can also press ZONE SELECT on the
receiver repeatedly to select "HDMI
ZONE", then press ZONE POWER on the
receiver.
5
Select [HDMI Zone Input], then
select the source signals you
want to output.
You can also turn INPUT SELECTOR on the
receiver while "H. xxxx"* appears on the
display panel.
* "xxxx" is the input name.
6
Adjust the volume using the
volume control on the
amplifier or TV in HDMI zone.
Tip
You can avoid possible interference to the signals
in main zone by setting [Priority] in [HDMI Settings]
to [Main Only]. However, if the same input is
selected in HDMI zone, there will be no video or
audio output from HDMI zone. For details on the
setting, refer to "3. Setting the priority for the main
zone (Priority)" in Help Guide.
You can operate the receiver without pointing the
remote control toward the receiver if you connect
an IR Blaster (not supplied) to the IR REMOTE jack.
To exit zone operation
Set [HDMI Zone Power] to [Off] in step 4.
Available inputs for each zone
Available inputs vary depending on the zone
you have selected. Select the input you want
from the list appears on TV screen or display
panel.
For details on the available inputs, refer
"Available inputs for each zone" in Help
Guide.
For main zone
You can select all input source from every
device connected to the receiver in the main
zone.
Additionally, you can select a sound source
received via BLUETOOTH connection.
For Zone 2 and/or Zone 3
You cannot watch video in Zone 2 and/or
Zone 3. Sound is not available from devices
connected to the HDMI IN jacks.
Note
Signals from the HDMI IN, OPTICAL IN and COAXIAL
IN jacks cannot be output to the speakers in Zone
2 or Zone 3.
You can select either [USB], [Home Network],
[Music Services] or [Bluetooth] from the main zone,
Zone 2 and Zone 3. Priority is given to the choice
which has most recently been selected, even if a
different choice has already been selected in one
of the zones.
If you select [Screen mirroring] in the main zone
when the current input in Zone 2 or Zone 3 is [USB],
[Home Network], [Music Services] or [Bluetooth],
the input for Zone 2 and Zone 3 will change to
[SOURCE]. In this case, no sound is output to Zone
2 or Zone 3.
If you connect BLUETOOTH headphones to the
main zone while an AV device is playing and the
current input in Zone 2 or Zone 3 is [USB], [Home
Network] or [Music Services], the input for Zone 2
and Zone 3 will change to [SOURCE]. In this case,
only FM tuner and analog audio signal are output
to Zone 2 or Zone 3.
If you connect BLUETOOTH headphones to the
main zone while an AV device is playing, the
BLUETOOTH headphones will be disconnected if
you select [USB], [Home Network] or [Music
Services] in Zone 2 or Zone 3.
39
GB
Hide quick links:
Advertisement
Table of Contents
