Connecting Speakers - Sony STR-DN1070 Operating Instructions Manual

Multi channel av receiver
Hide thumbs Also See for STR-DN1070:
Table of Contents

Advertisement

Speaker configuration and speaker pattern settings
Select the speaker pattern according to the speaker configuration which you are using.
Speaker configuration in each zone
Main zone
Zone 2*
5.1-channel
Not used
7.1-channel
Not used
using surround
back speakers
7.1-channel
Not used
using front high
speakers
5.1-channel with
2-channel
Zone 2 speakers
3.1-channel with
2-channel
Zone 2 and
Zone 3
connections
5.1-channel with
Not used
Bi-Amplifier
connection
5.1-channel with
Not used
Front B speakers
* You can only enable the SPEAKERS ZONE 2 terminals if you set [SURROUND BACK/ZONE2 Priority] in [Speaker
Settings] to [ZONE2 Terminals], and turn on the ZONE 2 power.
** You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have
surround back and front high speakers.

Connecting Speakers

This receiver allows you to connect up to 7.1-channel system.
The speaker layout diagram is a guide for the ideal speaker placement. You do not need to adjust
your speaker placement exactly the same as the diagram.
Note
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cables are
not touching each other between the SPEAKERS terminals.
When you connect a subwoofer with an auto standby function, turn off the function when watching movies.
If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input
signal to the subwoofer, and the sound may not be output.
If you have two subwoofers, you can connect them to both SUBWOOFER OUT jacks.
GB
16
Zone 3
[Surround
Back
Speaker
Assign]**
Not used
[Off]
Not used
[Off]
Not used
[Off]
Not used
[Off]
2-channel
[Off]
Not used
[Bi-Amp]
Not used
[Front B]
[Surround
Speaker
Speaker
pattern to
Assign]
be selected
in [Speaker
Settings]
[Off]
[5.1]
[Off]
[7.1]
[Off]
[7.1 (FH)]
[Off]
[5.1]
[Zone3]
[3.1]
[Off]
[5.1]
[Off]
[5.1]
For
connection,
see page
17
18
19
20
21
22
23

Advertisement

Table of Contents
loading

Table of Contents