Konica Minolta pagepro 5650EN User Manual page 182

Symptom
You can't
print the con-
figuration
page.
Printing from
a USB mem-
ory device is
not possible.
Printing
takes too
much time.
172
Downloaded From ManualsPrinter.com Manuals
Cause
The tray is empty.
The printer's covers
aren't closed
securely.
There is a media
misfeed.
The file format (file
extension) is not one
that can be printed.
MEMORY DIRECT
for the printer is set to
.
DISABLE
A public user is not
specified for user
authentication.
The printer is set to a
slow printing mode
(for example, thick
stock or transpar-
ency).
The printer is set to
Energy Saver mode.
The job is very com-
plex.
The printer memory is
insufficient.
A toner cartridge for a
different region or an
unapproved genuine
toner cartridge is
installed.
Solution
Check that at least Tray 1 is loaded
with media, in place, and secure.
Make sure the covers are closed
securely. Close all covers gently to
avoid jarring the printer. Make sure that
the toner cartridge is installed correctly
when closing the center output tray.
Clear the media misfeed.
Only files with the format (extension)
for , ,
JPEG TIFF XPS
ported.
Change the setting for
MENU/MEMORY DIRECT
.
ENABLE
Contact the printer administrator.
It takes more time to print on special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
It takes time for printing to start in
Energy Saver mode. If you do not want
to use this mode, disable it. (
DEFAULT MENU/ENERGY SAVER
menu)
Wait. No action needed.
Add more memory.
Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific printer.
Solving Other Problems
, or are sup-
PDF
INTERFACE
to
SYS