5
Remove the panel.
6
Insert the DIMM at an angle
(about 45°) into the connector,
making sure that the notch on
the unit aligns with the tab on
connector, and then press down
carefully until it clicks into place.
7
Reinstall the panel and tighten
the two screws.
8
Attach the right side cover.
9
Reconnect all interface cables.
10
Reconnect the power cord, and
turn on the printer.
194
Downloaded From ManualsPrinter.com Manuals
Be sure to handle the
DIMM by the edges only.
You will hear a click when
the DIMM is properly
placed.
Dual In-Line Memory Module (DIMM)