FIN-
ISHING
JOB
SEPA-
RATION
48
Downloaded From ManualsPrinter.com Manuals
Settings
SUB TRAY/MAIN TRAY/OFFSET
When
SUB TRAY
tray.
When
MAIN TRAY
put tray.
When
is selected, the paper is fed to the sub output tray
OFFSET
with each copy slightly shifted.
The setting specified in the printer driver will override this menu
setting.
The paper size available for
follows:
Width:
to
89
Length:
140
can be set only when
OFFSET
Settings
ON/OFF
The paper is fed to the sub output tray with each print job slightly
shifted.
If
FINISHING
out stacked on the top of each other without being shifted.
is selected, the paper is fed to the sub output
is selected, the paper is fed to the main out-
SUB TRAY
(
to
216 mm
3.5
8.5 inches
to
(
to
356 mm
5.5
COLLATE
is set to
MAIN TRAY
Configuration Menu Overview
or
OFFSET
)
)
14.0 inches
is
.
ON
, the print jobs are fed
is as