Standards, Regulations And Code Compliance; Notes On Installation And Operation; Other Important Information - Buderus Logano GB125/22 BE Installation And Service Instructions Manual

1.3 Standards, regulations and code
compliance
It is the installers responsibility to ensure the
installation and operation of this heating sys-
tem meets all applicable federal, state, and
local codes.
The boiler must be installed by a qualified in-
staller and in accordance with all require-
ments of NFPA-31, "Installation of Oil-
Burning Equipment". Installation must com-
ply with all local and national legal require-
ments and the regulations of all institutions
having legislative authority with regard to the
installation of oil-fired boilers.
1.4

Notes on installation and operation

When installing and operating the heating system
observe the following:
– The local building codes regarding the installation
– The local building codes regarding combustion air sup-
ply and venting systems, and the chimney connection
– Regulations governing electrical connection to the
mains power supply
– The regulations and standards relating to the safety
systems for the water heating system
Logano GB125 BE US/CA - Technical specifications are subject to change without prior notice.
Safety instructions and explanation of symbols
1.4.1

Other important information

– Only operate the boiler with the concentric air/venting
system specifically designed and approved for it.
– Follow the local code when connecting the conden-
sate outlet to the public sewer system.
1
5