Inspections Before Shooting - Panasonic VARICAM LT Operating Manual

Inspections before shooting

Before shooting, perform the following inspections to ensure that the system operates properly.
1
Confirm that the assembled modules and the handles are fixed securely.
2
Insert expressP2 memory card in the main slot, and Class10 or higher SDXC/SDHC memory card in the sub slot, and close the
slot cover.
3
Set the power switch to <l>, and confirm the following items.
f [BACKUP BATT EMPTY] is not displayed on the viewfinder screen.
f The remaining battery level is adequate in the status display on the control panel.
f The remaining space on the media is adequate in the status display on the control panel.
4
Press the <REC> button and check the following.
f The main slot card access LED flashes in orange.
f The <REC> button lights up in red.
f No system warning is displayed with the status display on the control panel.
5
Press the <REC> button again.
Confirm that the main slot card access LED lights up in orange and the <REC> button does not light in red.
6
Press the <PLAY> button to switch to the PLAY screen, and play back the clip you just recorded.
Confirm that the clip plays back properly on the control panel or viewfinder.
Chapter 3 Preparation — Inspections before shooting
– 35 –