PL lens mount module
Left side
1 Mounting screw
The screw to fix the PL lens mount module to the camera.
2 Mount fixing ring
Fixes the PL lens mount module to the camera.
3 Tightening hole
The mount fixing ring can be tightened using an Allen wrench.
Right side
1 Tightening hole
The mount fixing ring can be tightened using an Allen wrench.
2 Mounting screw
The screw to fix the PL lens mount module to the camera.
Front
1 Lens fixing ring
Fixes the lens by turning the ring after mounting the lens to the lens mount.
2 Mount cap
Attaches the cap when the lens is not mounted.
Rear
1 Positioning hole
Align with the positioning pin on the camera.
2 Contact
Align with the connector of the camera.
Chapter 2 Description of Parts — PL lens mount module
1
2
1
2
1
– 18 –
1
2
3
2