Memory Card; Insert Memory Card; Ejecting The Memory Card - Panasonic VARICAM LT Operating Manual

Memory card

Insert memory card

When using the camera for the first time, be sure to set the time data beforehand. (page 34)
Insert the P2 card into the main slot and the SD memory card into the sub slot.
Card slot cover
Fig. 1
1
Open the card slot cover. (Fig. 1)
2
Insert a card into the card slot. (Fig. 2)
f P2 cards (main slot)
- Insert the card with the logo facing outside until the eject button pops out.
- Press the eject button that pops up to the top.
f SD memory cards (sub slot)
- Insert with the label facing outside.
3
Securely close the card slot cover. (Fig. 3)
NOTE
@
t Be sure to format P2 cards only on the camera.
t If a SD memory card is inserted slowly, [FORMAT ERROR!] or [NOT SUPPORTED!] may be displayed. In such a case, insert the card again.
Take the following action if it still displays.
- [FORMAT ERROR!]: Format the SD memory card.
- [NOT SUPPORTED!]: That SD memory card cannot be used. Insert different SD memory card.
t Recording or operation of the PLAY screen is not possible until the card slot cover is closed. The file operation on the SD memory card is possible.

Ejecting the memory card

1
Open the card slot cover.
2
Remove the card.
f P2 cards
- Lift the eject button (Fig. 1), and press in. (Fig. 2)
f SD memory cards
- Press in the SD memory card further into the camera and let go.
- The SD memory card is released from the card slot, and it can be removed.
Chapter 4 Video Recording and Color Grading — Memory card
Main slot
Sub slot
Fig. 1
Eject button
Fig. 2
Fig. 2
– 57 –
Fig. 3