Ar Before Using (Remove The Sensor Tag, Using The Shoulder And Hand Straps, Lens Cap) - Panasonic Palmcorder PV-L352 Operating Instructions Manual

Before Using
How to remove the Sensor tag
Hand Strap
Open the Hand Strap as illustrated
at left.
O Remove the Sensor tag.
Then, replace the Hand Strap.
Sensor tag
Adjust the Length of the
Remove Battery Pack before completing Shoulder Strap
the following steps:
Attaching Shoulder Strap
1 Undo strap ends
from buckles.
Thread strap ends through Strap
Pull a loop of strap from buckle, then pull
Rings on Camcorder.
p
p
p
strap tight to shorten or lengthen.
Hand Strap
3 Re-insert the strap © t2 D
ends into buckles. E f) geg
di
EE DICTA
Lem,
Adjust Hand Strap length to fit your hand as
min. 25.4 mm (1 inch) shown.
Attaching the Lens Cap
Strap:
4 Thread the Strap through 7
Y the Lens Cap attachment
ring as illustrated at left.
Attaching the Lens Cap Cord to the Hand Strap: d
Remove the Hand Strap from the front clasp and thread Sa, fa
the Strap through the loop in the Lens Cap Cord.
Reattach the Hand Strap.
1 2 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com