Key Inhibit Menu; User Memory Menu; Saving The User Memory - Sony LMD-1951MD Instructions For Use Manual

Submenu Setting
SERIAL REMOTE Selects the mode to be used.
• OFF: SERIAL REMOTE does
• ETHERNET: The monitor is
• RS-232C: The monitor is
MONITOR Set the monitor setting.
CONNECTION Sets the connection of the monitor
and the controller.

KEY INHIBIT menu

KEY INHIBIT
K E Y I N H I B I T :
You can lock the setting so that they cannot be changed
by an unauthorized user.
Select OFF or ON.
If you set to ON, all items are displayed in black,
indicating the items are locked.
not function.
controlled by the command
of Ethernet.
controlled by the command
of RS-232C.
MONITOR ID: Sets the ID
of the monitor.
GROUP ID: Sets the group
ID of the monitor.
IP ADDRESS: Sets the IP
address.
SUBNET MASK: Sets the
subnet mask.
(255.255.255.000)
DEFAULT GATEWAY:
Sets the default gateway on
or off.
ADDRESS: Sets the default
gateway.
CANCEL: Selects to cancel
the setting.
CONFIRM: Selects to save
the setting.
PEER TO PEER: for one
to one connection
LAN: for connection via a
network
xx

USER MEMORY menu

U S E R M E M O RY 1 / 3
x0 1 U S E R 0 1
· 0 2 U S E R 0 2
· 0 3 U S E R 0 3
· 0 4 U S E R 0 4
· 0 5 U S E R 0 5
· 0 6 U S E R 0 6
· 0 7 U S E R 0 7
· 0 8 U S E R 0 8
U S E R M E M O RY 2 / 3
x0 9 U S E R 0 9
· 1 0 U S E R 1 0
· 1 1 U S E R 1 1
· 1 2 U S E R 1 2
· 1 3 U S E R 1 3
· 1 4 U S E R 1 4
· 1 5 U S E R 1 5
· 1 6 U S E R 1 6
U S E R M E M O RY 3 / 3
x1 7 U S E R 1 7
· 1 8 U S E R 1 8
· 1 9 U S E R 1 9
· 2 0 U S E R 2 0
Submenu Setting
01 to 20 You can save the setting of the following
functions.
• CONTRAST
• BRIGHTNESS
• CHROMA
• PHASE
COLOR TEMP/SPACE menu
• COLOR TEMP
• ADJUST GAIN
• ADJUST BIAS
• COLOR SPACE
USER CONTROL menu
• APERTURE
SYSTEM SETTING menu
• GAMMA
• I/P MODE

Saving the user memory

You can save the 20 picture settings with the name. To
load the picture in the saved setting, see "Loading USER
MEMORY" on page 24.
To save the picture setting
1
Press the + or – button to select the memory number
in the USER MEMORY menu, then press the
ENTER button.
33
Adjustment Using the Menus