Key Inhibit Menu - Sony LMD-941W Operating Instructions Manual

Submenu Setting
FORCED TALLY The tally lamp function is forcibly
assigned to 7 pin and 8 pin of the
PARALLEL REMOTE connector.
Selecting ON assigns tally lamp
green to 7 pin and tally lamp red to
8 pin.
Note
When OFF is selected, any listed
functions can be assigned to 7 and 8
pins. Selecting ON with any
function other than the tally lamp
assigned to 7 and 8 pins will ignore
this setting, and the tally lamp is
forcibly assigned to 7 and 8 pins
instead.
SERIAL REMOTE Selects the mode to be used.
• OFF: SERIAL REMOTE does
• ETHERNET: The monitor is
• BKM-15R/16R: Sets BKM-15R
MONITOR Sets the monitor setting.
CONTROLLER Sets the address of the remote
controller.
ON: Forcibly assigns the
tally lamp function.
OFF: The tally lamp
function is not forcibly
assigned.
not function.
controlled by the command
of Ethernet.
or BKM-16R.
MONITOR ID: Sets the ID
of the monitor.
GROUP ID: Sets the group
ID of the monitor.
IP ADDRESS: Sets the IP
address.
SUBNET MASK: Sets the
subnet mask.
(255.255.255.000)
DEFAULT GATEWAY:
Sets the default gateway on
or off.
ADDRESS: Sets the default
gateway.
CANCEL: Selects to cancel
the setting.
CONFIRM: Selects to save
the setting.
IP ADDRESS: Sets the IP
address.
SUBNET MASK: Sets the
subnet mask.
(255.255.255.000)
DEFAULT GATEWAY:
Sets the default gateway on
or off.
ADDRESS: Sets the default
gateway.
CANCEL: Selects to cancel
the setting.
CONFIRM: Selects to save
the setting.
Submenu Setting
CONNECTION Sets the connection of the monitor
and the controller.

KEY INHIBIT menu

KEY INHIBIT
K E Y I N H I B I T :
You can lock the setting so that they cannot be changed
by an unauthorized user.
Select OFF or ON.
If you set to ON, all items are displayed in black,
indicating the items are locked.
PEER TO PEER: for one
to one connection
LAN: for connection via a
network
xx
71
Adjustment Using the Menus