Table of Contents
Advertisement
REMOTE menu
Submenu
Setting
PARALLEL REMOTE
Selects the PARALLEL REMOTE
connector pins for which you want
to change the function.
You can assign various functions to
pins 1 to 4 and pins 6 to 8. The
following lists the functions you
can assign to the pins.
• – – – ("– – –": No function is
assigned.)
• COMPOSITE
• Y/C
• RGB
• COMPONENT
• DVI
• HD15
• OPTION A-1
• OPTION A-2
• OPTION B-1
• OPTION B-2
• OVERSCAN
• FULL
• NORMAL
• NATIVE
• 4:3
• 16:9
• TALLY G
• EXT SYNC
• AUTO SYNC DETECT
• BLUE ONLY
• MONO
• MIRROR IMAGE
• 2D/3D SELECT
• CHECKERBOARD
• L/R SWITCH
• HOROPTER CHECK
• DISPARITY SIM.
Note
If you use the PARALLEL
REMOTE function, you need to
connect cables. For more details,
see page 43.
SERIAL REMOTE
Selects the mode to be used.
• OFF: SERIAL REMOTE does
• RS-232C: The monitor is
• ETHERNET: The monitor is
not function.
controlled by the command
of RS-232C.
controlled by the command
of Ethernet.
Submenu
Setting
MONITOR
Set the monitor setting.
KEY INHIBIT menu
KEY INHIBIT
K E Y I N H I B I T :
You can lock the setting so that they cannot be changed
by an unauthorized user.
Select OFF or ON.
If you set to ON, all items are displayed in black,
indicating the items are locked.
MONITOR ID: Sets the ID
of the monitor.
GROUP ID: Sets the group
ID of the monitor.
IP ADDRESS: Sets the IP
address.
SUBNET MASK: Sets the
subnet mask.
(255.255.255.000)
DEFAULT GATEWAY:
Sets the default gateway on
or off.
ADDRESS: Sets the default
gateway.
CANCEL: Selects to cancel
the setting.
CONFIRM: Selects to save
the setting.
xx
39
Adjustment Using the Menus
Advertisement
Table of Contents
