Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for jablotron Azor
Summary of Contents for jablotron Azor
- Page 1 User manual version 1.2...
-
Page 2: Table Of Contents
Battery replacement AZ-10M door detector ..................5 If the batteries in any detector are low, Azor sends an SMS message and it is optically AZ-10P motion detector ..................6 signalled by the detector. Azor must be unset during battery replacement. When you open Installation ......................7... - Page 3 .). power supply one alkaline battery (battery lifetime is approx.1 year) If you decide to adjust Azor’s behaviour to suit your needs, you just need to connect it to a dimensions 55 x 40 x 15 mm; 30 g PC and use the included user-friendly ALink software.
-
Page 4: Azor Kit Contents
Warning: some GSM networks do not provide an exact time signal. In such a case Azor’s internal clock must be set manually from a PC via A-link. If the clock is not set, no time will be stated in the informative SMS. -
Page 5: Az-10D Chip Reader
(near the minus pole of the battery). If people smoke in the room during normal operation, you can program Azor to react only when set – see the Settings. In such a case disconnect the siren in the detector as well. Do not forget to ventilate the premises before setting the alarm. -
Page 6: Az-10P Motion Detector
Battery-low signalling When the detector batteries are low, Azor sends an informative message. Besides that a test LED indicator also lights up. If the detector LED is flashing when movement is detected (outside test mode), the batteries are low. -
Page 7: Installation
Control panel and Serial for displaying the code. The code is displayed after pressing SET on the AT-10D chip reader and scanning the chip. Note: Azor uses special security chips. No other access chips can be enrolled to it. AZ-10M door detector Besides detecting door and window opening, the detector can also report e.g. -
Page 8: Motion Detector Installation
Azor’s properties can be set using a computer with MS Windows XP or higher. Computer connection You can use a USB cable to connect Azor to the computer. If the computer fails to open the setting program automatically within a certain time after the connection has been... -
Page 9: Chip Reader Installation
Switch on the communicator and test its functioning. as well. Azor’s internal clock can also be set from a connected PC – see the Settings. Switching the communicator on for the first time Find a concealed place near a socket. - Page 10 If any of the LED indicators fails to light up, check what Azor signals (see If you receive an alarm call, Azor does not call the other users. If no one receives the alarm description in the manual beginning).
-
Page 11: Installation Of The Communicator And Its Antenna
– see the Settings. the template at the rear of the manual to mark the spots where you want to fix Azor A chip reader is usually used to control Azor at the guarded premises. Users whose to the wall. -
Page 12: Enrolment Of A Telephone
Azor should confirm detector activation with a voice message to the user’s telephone Test the menu functions and end the call. number. In order to access the menu repeatedly, just call Azor again (from the same telephone End the call to finish testing. number). Tips and specifications Tips and specifications ...
Need help?
Do you have a question about the Azor and is the answer not in the manual?
Questions and answers