Honda 08E91-E22-101B Installation Instructions Manual page 27

11. Check that "The registration of the Remote Control
Engine Starter Unit has been completed" is shown,
then click the check button.
Check that "The registration of the
Remote Control Engine Starter Unit
has been completed" is shown.
12. Check that "Check that the engine can be started by
the Transmitter" is shown, then click the check
button.
Check that "Check that the engine can be
started by the Transmitter" is shown.
13. Perform the function test on the next page, then
remove the HDS.
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
CHECK BUTTON
752510AS
CHECK BUTTON
752511AS
AII 44367 (1008)
27 of 28