Honda 08E91-E22-101B Installation Instructions Manual page 21

95. Route the hood switch harness. Secure the hood
switch harness to the vehicle panel with the three
clips installed on the hood switch harness.
HOOD SWITCH
HARNESS
FRONT
CABLE
CLIP
96. Attach the cable clip to the hood switch harness at
the green tape, and secure it to the vehicle panel.
97. Remove the vehicle grommet. Route the hood
switch harness 2-pin connector into the interior
compartment.
GROMMET
INSIDE
OUTSIDE
Install the grommet.
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
GREEN
TAPE
VEHICLE
PANEL
3 HOOD SWITCH
HARNESS CLIPS
FRONT
HOOD
SWITCH
HARNESS
VEHICLE
GROMMET
(Discard.)
98. Route the hood switch harness along the vehicle
harness to the center of the vehicle. Secure the hood
switch harness to the vehicle harness with six wire
ties.
FRONT
99. Plug the hood lock 2-pin connector to the hood
6311122Y
switch harness 2-pin connector and secure the
connector to the vehicle panel.
HOOD SWITCH
HARNESS
6311113Y
AII 44367 (1008)
GREEN
TAPE
6 WIRE TIES
HOOD SWITCH HARNESS
2-PIN CONNECTOR
VEHICLE
PANEL
VEHICLE
HARNESS
HOOD LOCK
2-PIN
CONNECTOR
6311150Y
21 of 28