Honda 08E91-E22-101B Installation Instructions Manual page 14

51. Unplug the vehicle 24-pin connector from the
underside of the fuse box and plug it into the engine
starter harness 24-pin connector as shown.
VEHICLE 24-PIN
CONNECTOR
52. Install the engine starter harness 24-pin connector to
the 24-pin connector on the underside of the fuse
box as shown.
53. Remove the vehicle fuse case.
FUSE BOX
54. Wrap the vehicle fuse case with one urethane tape
half cut in step 26.
14 of 28
VEHICLE 24-PIN
FUSE BOX
CONNECTOR
ENGINE STARTER
HARNESS 24-PIN
CONNECTOR
ENGINE START-
ER HARNESS 24-
PIN CONNECTOR
921605BD
URETHANE
TAPE
URETHANE
TAPE
VEHICLE
FUSE CASE
921606BD
55. Secure the vehicle fuse case to the vehicle harness
with one wire tie.
WIRE TIE
FUSE BOX
56. Install the engine starter harness fuse case to the
vehicle 20-pin connector.
57. Secure the antenna cable to the engine starter
harness with one wire tie.
VEHICLE
HARNESS
WIRE TIE
58. Secure the engine starter harness 23-pin connector
(blue), and the engine starter harness to the vehicle
harness with three wire ties.
AII 44367 (1008)
FUSE BOX
VEHICLE
HARNESS
ENGINE STARTER
HARNESS 23-PIN
CONNECTOR
(Blue)
WIRE TIE
VEHICLE
HARNESS
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
VEHICLE
HARNESS
VEHICLE
FUSE CASE
ENGINE
STARTER
HARNESS
FUSE CASE
VEHICLE 20-PIN
CONNECTOR
921607BD
ANTENNA
CABLE
ENGINE
STARTER
HARNESS
VEHICLE
HARNESS
SRS
HARNESS
(Yellow)
ENGINE
STARTER
HARNESS
921608BD