Honda 08E91-E22-101B Installation Instructions Manual page 18

77. Bundle the excess antenna cable and secure it to the
vehicle harness with one wire tie.
VEHICLE ANTENNA CABLE
HARNESS Bundle the excess.
WIRE TIE
78. Secure the antenna cable to the vehicle harness with
two wire ties.
79. Install the control unit bracket on the driver's under
cover with two 5 x 12 mm self-tapping screws.
SELF-TAPPING
SCREW, 5 x 12 mm
18 of 28
WIRE TIE
921704BD
CONTROL UNIT
BRACKET
DRIVER'S UNDER
921705AD
COVER
80. Install the control unit to the control unit bracket.
DRIVER'S UNDER
COVER
CONTROL UNIT
BRACKET
81. Using isopropyl alcohol on a shop towel, thoroughly
clean the area where the urethane tape will attach.
URETHANE TAPE
82. Attach a urethane tape to the bracket on the steering
column lower cover.
AII 44367 (1008)
CONTROL UNIT
CONTROL UNIT
TAB
CONTROL UNIT
BRACKET
BRACKET
STEERING COLUMN
LOWER COVER
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
921706AD
752201AK