Honda 08E91-E22-101B Installation Instructions Manual page 10

25. Measure the antenna cable as shown. Wrap three
urethane tapes onto the antenna cable in those
positions.
ANTENNA
390 mm
ANTENNA
(15 in.)
CABLE
720 mm
(28 in.)
30 mm
(1.2 in.)
30 mm
(1.2 in.)
Cut.
URETHANE
TAPE
HALF URETHANE TAPE
26. Cut two urethane tapes in half. Wrap three of the half
pieces of urethane tape around the antenna cable as
shown.
27. Cut the urethane tape as shown. Attach the urethane
tape to the antenna plate as shown.
60 mm
(2.4 in.)
Cut.
URETHANE
TAPE
Align.
10 of 28
URETHANE TAPE
30 mm
(1.2 in.)
30 mm
(1.2 in.)
15 mm
(0.6 in.)
ANTENNA
PLATE
ANTENNA
28. Using isopropyl alcohol on a shop towel, thoroughly
clean the area where the antenna will attach. Allow it
to dry before proceeding.
ANTENNA
PLATE
29. Remove the adhesive backing from the antenna.
Insert the antenna plate under the headliner, align
the antenna with the template, and attach the
antenna to the windshield.
6N3003AK
30. Remove the template.
31. Push the antenna cable under the headliner as
shown. Be careful not to crease the headliner.
780101BK
AII 44367 (1008)
HEADLINER
ADHESIVE
ANTENNA
BACKING
HEADLINER
ANTENNA
CABLE
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
TEMPLATE
932002AD
932003AD