Atlantis Land A02-RA144-W300N User Manual page 81

Atlantis land wireless n adsl2+ router user's manual
Hide thumbs Also See for A02-RA144-W300N:
Table of Contents

Advertisement

You can set 16 different QoS rules. Each QoS rule has its detail setting conditions
like: 802.1p,application, DSCP, IP, MAC, Protocol, TOS, VLAN...etc, you can
modify the default value to any new one you wish. Please notice that only when
the packet fulfill every detail setting conditions here, then this packet will be
remarked as the priority queue of each rule. The non-selected setting part will be
treated as "don't care" and the system will not handle this setting part. If the
original packet does not have 802.1q tagged header, system will not add header
for this packet even the detail setting condition has adding 802.1p priority ability.
Field
Rule Index
Active
Application
Physical Ports
Destination MAC
IP (Destination)
Mask
(Destination)
Port Range
Source MAC
IP (Source)
Mask (Source)
Port Range
Protocol ID
VLAN ID Range
IPP/DS Field
IP Precedence
Range:
Type of Service:
DSCP Range
802.1p
Meaning
Select 16 different rules, each rule's detail can be set and
saved.
Select QoS is activated or deactivated.
Select 11 different applications: IGMP, SIP, H.323, MGCP,
SNMP, DNS, DHCP, RIP, RSTP, RTCP, RTP.
Once you select the application, the associated ports will be
displayed.
Set the Ethernet MAC value that you want to filter in
destination side.
Set the IP address value that you want to filter in destination
side.
Set the subnet mask value that you want to filter in
destination side.
Set the port range value that you want to filter in destination
side.
Set the Ethernet MAC value that you want to filter in source
side.
Set the IP address value that you want to filter in source
side.
Set the subnet mask value that you want to filter in source
side.
Set the port range value that you want to filter in source
side.
Set the protocol ID type that you want to filter.
Set the Vlan value that you want to filter.
Select IP QoS format.
Select the IP precedence range.
Select 5 different type of service.
Set the DSCP value that you want to filter.
Set the remarked new 802.1p priority value on the packet
that fulfill every detail setting condition of each rule.
A02-RA144-W300N
Rule
WebShare 144WN
Pag. 71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Webshare 144wn

Table of Contents