1. Manuals
  2. Brands
  3. Atlantis Land Manuals
  4. Network Router
  5. A02-RA243-W54M
  6. User manual

Atlantis Land A02-RA243-W54M User Manual

Wireless mimo adsl2+ router
Hide thumbs Also See for A02-RA243-W54M:
Table of Contents

Advertisement

Quick Links

Download this manual
WebShare 243WM
Wireless MIMO ADSL2+ Router
A02-RA243-W54M
USER'S MANUAL
A02-RA243-W54M_ME01
Where solutions begin
Company certified ISO 9001:2000

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A02-RA243-W54M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Atlantis Land A02-RA243-W54M

Summary of Contents for Atlantis Land A02-RA243-W54M

  • Page 1 WebShare 243WM Wireless MIMO ADSL2+ Router A02-RA243-W54M USER’S MANUAL A02-RA243-W54M_ME01 Where solutions begin Company certified ISO 9001:2000...
  • Page 3 Copyright The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions. CE Mark Warning This is a Class B product.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS CHAPTER 1... 1 1.1 A VERVIEW OF THE 1.2 P ACKAGE ONTENTS ... 2 1.3 W 243WM F HARE 1.4 W 243WM W HARE CHAPTER 2... 6 2.1 C AUTIONS FOR USING THE 2.2 T RONT ... 6 2.3 T ORTS ...
  • Page 5 3.6.3.3.2 Remote Access... 39 3.6.3.3.3 Firmware ... 40 3.6.3.3.4 Backup/Restore ... 41 3.6.3.3.5 Restart ... 42 3.6.3.3.6 User Management ... 42 3.6.3.4 Firewall ... 44 3.6.3.4.1 Packet Filering ... 44 3.6.3.4.2 MAC address Filtering ... 51 3.6.3.4.3 Intrusion Detection... 52 3.6.3.4.4 Block Wan Request...

  • Page 7: Chapter 1

    WEBSHARE 243WM Chapter 1 Introduction 1.1 An Overview of the WebShare 243WM Broadband Sharing and IP sharing The Wireless MIMO ADSL2+ Router supports 4 x 10/100 Mbps auto-negotiating Fast Ethernet ports for connection to your PC or LAN and downstream (with built-in ADSL2+ modem) rate up to 24Mbps.

  • Page 8: Package Contents

    1.2 Package Contents • WebShare 243WM Wireless ADSL2+ Router • Vera (Multilanguage Interactive Tutorial) • One CD-Rom containing the online manual • One Quick Start Guide • 3* 5 dBi Antenna (R-SMA) • One RJ-11 ADSL/telephone cable • One CAT-5 LAN cable •...
  • Page 9 • Network Address Translation (NAT): Allows multi-users to access outside resource such as Internet simultaneously with one IP address/one Internet access account. Besides, many application layer gateway (ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News, Net2phone, Ping, NetMeeting and others. •...
  • Page 10 • Virtual Server: Users can specify some services to be visible from outside users. The router can detect incoming service request and forward it to the specific local computer to handle it. For example, users can assign a PC in a LAN acting as a WEB server inside and expose it to the outside network.

  • Page 11: Webshare 243Wm Wireless Application

    WEBSHARE 243WM 1.4 WebShare 243WM Wireless Application...

  • Page 12: Chapter 2

    Place the WebShare 243WM Wireless on a stable surface. Only use the power adapter that comes with the package. Do NOT upgrade firmware on any Atlantis Land product over a wireless connection. Failure of the device may result. Use only hard-wired network connections.

  • Page 13: The Rear Ports

    ADSL 2.3 The Rear Ports PORT LINE Connect the supplied RJ-11 cable to this port when connecting to the ADSL/telephone network. Connect an UTP Ethernet cable to one of the four LAN ports when connecting to a PC or an office/home network of 10Mbps or 100Mbps.
  • Page 14 them and the wall socket (unless you are using a Central Splitter or Central Filter installed by a qualified and licensed electrician), and ensure that all line filters are correctly installed and the right way around. Missing line filters or line filters installed the wrong way around can cause problems with your ADSL connection, including frequent disconnections.
  • Page 15 WEBSHARE 243WM...
  • Page 16 WEBSHARE 243WM...

  • Page 17: Chapter 3

    The WebShare 243WM Wireless can be configured with your Web browser. The web browser is included as a standard application in the following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, and etc. The product provides a very easy and user- friendly interface for configuration.

  • Page 18: Configuring Pc In Windows

    3.3 Configuring PC in Windows For Windows 95/98/ME 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC.
  • Page 19 WEBSHARE 243WM 5. Then select the DNS Configuration tab. 6. Select the Disable DNS radio button and click “OK” to finish the configuration.

  • Page 20: For Windows Nt4.0

    WEBSHARE 243WM For Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click “OK”.

  • Page 21: For Windows 2000

    WEBSHARE 243WM For Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click LAN Area Connection. 3. In the LAN Area Connection Status window, click Properties.
  • Page 22 Select Internet Protocol (TCP/IP) and click Properties. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. Click “OK” to finish the configuration. WEBSHARE 243WM...

  • Page 23: For Windows Xp

    WEBSHARE 243WM For Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection 3. In the LAN Area Connection Status window, click Properties.
  • Page 24 WEBSHARE 243WM 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons 6. Click “OK” to finish the configuration.

  • Page 25: Factory Default Settings

    • IP address (192.168.1.254), Subnet Mask (255.255.255.0) • DHCP Server: enable • WAN=PPPoA Routing, VPI=8, VCI=35, VC-Mux • SSSID= A02-RA243-W54M , Channel=6, WEP/WPA=disable 3.4.1 Username and Password The default username and password are admin and atlantis respectively. If you ever forget the password to log in, you may press the RESET button to restore the factory default settings.

  • Page 26: Lan And Wan Port Addresses

    3.4.2 LAN and WAN Port Addresses The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below. LAN Port IP address Subnet Mask DHCP server function 3.5 Information from the ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, IpoA.

  • Page 27: Status

    You will get a status report web page when login successfully. At the configuration homepage, the left navigation page where bookmarks are provided links you directly to the desired setup page, including: • Status (ARP Table, Routing Table, DHCP Table, System Log, Security Log) •...

  • Page 28: Routing Table

    “no” for dynamically-generated ARP table entries • “yes” for static ARP table entries added by the user 3.6.1.2 Routing Table Display the current routing paths of A02-RA243-W54M. • #: Item number • Destination: IP address of the destination network. • Netmask: The destination netmask address.

  • Page 29: System Log

    • Leased: DHCP assigned IP addresses information. • IP Address: IP addresses of devices on your LAN (Local Area Network). • MAC Address: The MAC Address that you want to assign the fixed IP address • Client Host Name: Expired IP addresses information •...

  • Page 30: Quick Start Guide

    3.6.2 Quick Start Guide For detailed instructions on configuring WAN settings, see the WAN section of this manual. The information you need for the Quick Start wizard to get you online are your login (often in the form of username@ispname), your password, and the encapsulation type. Your ISP can supply all the details you need.
  • Page 31 • NAT: Select “Enabled”. Optional Setting • IP Address: Type your ISP assigned IP address in the IP Address text box. • Subnet Mask: Enter a subnet mask in dotted decimal notation. • Default Gateway: You must specify a gateway IP address (supplied by your ISP) •...

  • Page 32: Configuration

    3.6.3 CONFIGURATION When you click this item, you get following sub-items to configure WebShare 243WM Wireless : • LAN • WAN • System • Firewall • QoS • Virtual Server • Advanced 3.6.3.1 LAN A Local Area Network (LAN) is a shared communication system to which many computers are attached and is limited to the immediate area, usually the same building or floor of a building.

  • Page 33: Wireless

    3.6.3.1.2 Wireless • Mode: 802.11b + g (Mixed mode), 802.11b and 802.11g. The factory default is 802.11b + g. • ESSID: Enter the unique ID given to the Access Point (AP), which is already built-in to the router’s wireless interface. To connect to this device, your wireless clients must have the same ESSID as the device.
  • Page 34 WEBSHARE 243WM You must make sure that the SSID, Encryption and Channel is set the same as that AP you wish to connect. When WDS is enable only WEP ecryption is supported. The range of radio frequencies used by IEEE 802.11b wireless devices is called a “channel”.

  • Page 35: Wireless Security

    3.6.3.1.3 Wireless Security You can disable or enable with WPA or WEP for protecting wireless network. The default mode of wireless security is disabled. WPA Pre-Shared Key: • WPA Algorithms: TKIP (Temporal Key Integrity Protocol) utilizes a stronger encryption method and incorporates Message Integrity Code (MIC) to provide protection against hackers.

  • Page 36: Dhcp Server

    • WEP Encryption: To prevent unauthorized wireless stations from accessing data transmitted over the network, the router offers highly secure data encryption, known as WEP. If you require high security for transmissions, there are two alternatives to select from: WEP 64 and WEP 128. WEP 128 will offer increased security over WEP •...
  • Page 37 WEBSHARE 243WM To disable the router’s DHCP Server, check Disabled and click Next then click Apply. When the DHCP Server is disabled you need to manually assign a fixed IP address to each PC on your network, and set the default gateway for each PC to the IP address of the router (the default is 192.168.1.254).
  • Page 38 WEBSHARE 243WM...

  • Page 39: Wan

    3.6.3.2 WAN Before you start installing this device, you have to check with your ISP what kind of service (connection method) is provided such as PPPoE, PPPoA, RFC1483 bridged or routed, IPoA. Gather the information as illustrated in the following table and keep it for reference. PPPoE PPPoA RFC1483...
  • Page 40 PPPoE(RFC 2516) or PPPoA(RFC 2364) PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using PPP. PPPoA stands for Point to Point Protocol over ATM Adaptation Layer 5 (AAL5). It provides access control and billing functionality in a manner similar to dial-up services using PPP. •...
  • Page 41 • Always on: If you want the router to establish a PPPoE session when starting up and to automatically re-establish the PPPoE session when disconnected by the ISP. • Connect to Demand(PPPoE only): If you want to establish a PPPoE session only when there is a packet requesting access to the Internet (i.e.

  • Page 42: Rfc 1483 Routing

    RFC 1483 Routing • Description: Your description of this connection. • VPI and VCI: Enter the information provided by your ISP. • NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through a single IP account, sharing the single IP address. If users on your LAN have public IP addresses and can access the Internet directly, the NAT function can be disabled.

  • Page 43: Dns

    BRIDGE (PPPoE) • Description: A user-definable name for this connection. • VPI/VCI: Enter the information provided by your ISP. • Encapsulation method: Select the encapsulation format, this is provided by your ISP. 3.6.3.2.2 DNS A Domain Name System (DNS) contains a mapping table for domain name and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www.yahoo.com and an IP address.

  • Page 44: Adsl

    3.6.3.2.3 ADSL • ADSL Mode: There are four modes “Annex A”,”Annex L”,”Annex M” ,”Annex J”, that user can select for this connection. • Modulator: There are four modes “AUTO”,”ADSL multimode”,”ADSL2”and”ADSL2+” that user can select for this connection. • DSP Firmware Version: DSP code version •...

  • Page 45: System

    WEBSHARE 243WM 3.6.3.3 System There are six items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Restart and User Management. 3.6.3.3.1 Time Zone The router does not have a real time clock on board; instead, it uses the Simple Network Time Protocol (SNTP) to get the current time from an SNTP server outside your network.

  • Page 46: Firmware

    Upgrade: Click upgrade to begin the upload process. This process may take up to two minutes. Do NOT upgrade firmware on any Atlantis Land product over a wireless connection. Failure of the device may result. Use only hard-wired network connections.

  • Page 47: Backup/Restore

    WEBSHARE 243WM 3.6.3.3.4 Backup/Restore These functions allow you to save and backup your router’s current settings to a file on your PC, or to restore a previously saved backup. This is useful if you wish to experiment with different settings, knowing that you have a backup handy in the case of any mistakes. It is advisable to backup your router’s settings before making any significant changes to your router’s configuration.

  • Page 48: Restart

    WEBSHARE 243WM 3.6.3.3.5 Restart Click Restart with option Current Settings to reboot your router and restore your last saved configuration. If you wish to restart the router using the factory default settings (for example, after a firmware upgrade or if you have saved an incorrect configuration), select Factory Default Settings to reset to factory default settings.
  • Page 49 WEBSHARE 243WM You are strongly advised to change the password on the default “admin” account when you receive your router, and any time you reset your configuration to Factory Defaults.

  • Page 50: Firewall

    WEBSHARE 243WM 3.6.3.4 Firewall Your router includes a full DoS firewall for controlling Internet access from your LAN, as well as helping to prevent attacks from hackers. In addition to this, when using NAT (Network Address Translation. Please see the WAN configuration section for more details on NAT) the router acts as a “natural”...
  • Page 51 Packet filtering function enables you to configure your router to check specified internal/external user (IP address) from Internet access, or you can disable specific service request (Port number) to /from Internet. This configuration program allows you to set up different filter rules up to 10 for different users based on their IP addresses or their network Port number.
  • Page 52 • Packet Type: Specify the packet type (TCP, UDP, ICMP or any) that the rule will be applied to.Select TCP if you want to scope for the connection-based application service on the remote server using the port number. Or select UDP if you want to scope for the connectionless application service on the remote server using the port number.
  • Page 53 WEBSHARE 243WM http(OutGoing/Ingoing):...
  • Page 54 WEBSHARE 243WM POP3 (OutGoing/Ingoing):...
  • Page 55 WEBSHARE 243WM SMTP (OutGoing/Ingoing):...
  • Page 56 WEBSHARE 243WM FTP (OutGoing/Ingoing)::...

  • Page 57: Mac Address Filtering

    WEBSHARE 243WM DNS (OutGoing/Ingoing): 3.6.3.4.2 MAC address Filtering MAC filtering function enables you to configure your ADSL Firewall Router to block internal user (MAC address) from Internet access. If you check Enable, remember to choosea defaulkt rules policy between Forward or Drop. If you select Forward , the packet with the MAC address in the table(Drop) will be dropped and others will be forwarded.

  • Page 58: Intrusion Detection

    • Active: Select Yes from the drop down list box to enable MAC address filtering. • Action When Matched: Select “Drop” or “Forward”. • Log: Choose “Yes” if you wish to generate logs when the filer rule is applied to a packet.

  • Page 59: Block Wan Request

    • Alert Mail Time: Set the time for receiving Alert mail. • Your E-Mail: Set your email address. • Recipient’s E-mail: Set the Recipient’s email address to which notification is sent. • SMTP server: Set the SMTP (mail) server address. 3.6.3.4.4 Block Wan Request The “Block WAN Request”...
  • Page 60 From/To: IP Address Block Mode: You can select when Router have yo use thess settings Keywords Filtering: Allows blocking by specific keywords within a particular URL rather than having to specify a complete URL (e.g. to block any image called “advertisement.gif”). When enabled, your specified keywords list will be checked to see if any keywords are present in URLs accessed to determine if the connection attempt should be blocked.
  • Page 61 WEBSHARE 243WM Restrict URL Features • Block Java Applet: Blocks Web content which includes the Java Applet to prevent someone who wants to damage your system via the standard HTTP protocol. • Block ActiveX: Blocks ActiveX • Block Cookies: Blocks Cookies •...

  • Page 62: Qos Setup

    WEBSHARE 243WM 3.6.3.5 QoS Quality of Service Introduction If you’ve ever found your ‘net’ speed has slowed to a crawl because another family member is using a P2P file sharing program, you’ll understand why the Quality of Service features in routers is such a breakthrough for home users and office users.
  • Page 63 Application: A name that identifies an existing policy. Time Schedule: Scheduling your QOS policy to be applied. Direction: The traffic flow direction to be controlled by the QOS policy. There are two settings to be provided in the Router: LAN to WAN: You want to control the traffic flow from the local network to the outside world.
  • Page 64 : Before using these buttons to edit or delete a policy, please select one policy you want to edit/delete from the radio option : After you have configured the policies, you can press this button to apply the configuration. If you want to make the change persistent in flash, choose When you press your browser.
  • Page 65 GRE: For PPTP VPN Connections. Assigned Data rate: Assign the data ratio for this policy to be controlled. For examples, we want to only allow 20% of the total data transfer rate for the LAN-to-WAN direction to be used for FTP server. Then we can specify here with data ratio = 20. If you have ADSL LINE with 256K/bps.rate, the estimated data rate, in kbps, for this rule is 20%*256*0.9 = 46kbps.
  • Page 66 Silver service (L) Silver service (M) Silver service (H) Bronze service (L) Bronze service (M) Bronze service (H) Local Machine IPs: The IP address values for Local LAN machines you want to control. (For IP packets from LAN to WAN, it is the source IP address. For IP packages from WAN to LAN, it is the destination IP address.) Remote Machine IPs: The IP address values for Remote WAN machines you want to control.

  • Page 67: Connection Diagram

    QOS example for your Network Connection Diagram ADSL Subscription Rate Upstream: 256 kbps Downstream: 1024 Mbps Example QOS Plan Application IP or Ports VoIP User 192.168.1.1 FTP Sever 192.168.1.100 Incoming and HTTP web browsing users Control Flow Data Rate Outgoing Minimal 20% with high priority for non-used bandwidth with SDCP...
  • Page 68 WEBSHARE 243WM Example QOS Setup...
  • Page 69 WEBSHARE 243WM VoIP application Voice is latency-sensitive application. Most VoIP devices are use SIP protocol and the port number will be assigned by SIP module automatically. Better to use fixed IP address for catching VoIP packets as high priority. Above settings will help to improve quality of your VoIP service when traffic is full loading.
  • Page 70 WEBSHARE 243WM FTP Server Application Some of companies will setup FTP server for customer downloading or home user sharing their files by using FTP. LAN to WAN direction:...
  • Page 71 WEBSHARE 243WM WAN to LAN direction: With above settings that help to limit utilization of upstream of FTP. Time schedule also help you to only limit utilization at day time.
  • Page 72 WEBSHARE 243WM HTTP Web Browsing You can control the internet web browsing by specify the HTTP 80 (8080 for some proxy server). LAN to WAN direction:...
  • Page 73 WEBSHARE 243WM WAN to LAN direction:...

  • Page 74: Virtual Server

    3.6.3.6 Virtual Server When you click Virtual Server, you get the following figure. Being a natural Internet firewall, this network router protects your network from being accessed by outside users. When it needs to allow outside users to access internal servers, e.g.
  • Page 75 Application OutBound ICQ 98, 99a NetMeeting 2.1 a 3.01 VDO Live MIRC Cu-SeeMe 7648 TCP &UDP, 24032 UDP PC AnyWhere 5632 UDP, 22 UDP, 5631 TCP, 65301 TCP Edonkey MSN Messanger Services File Transfer Protocol (FTP) Data FTP Commands Telnet Simple Mail Transfer Protocol (SMTP) Email Domain Name Server (DNS) Trivial File Transfer Protocol (TFTP)

  • Page 76: Advanced

    3.6.3.7 Advanced Configuration options within the Advanced section are for users who wish to take advantage of the more advanced features of the router. Users who do not understand the features should not attempt to reconfigure their router, unless advised to do so by support staff. •...

  • Page 77: Dynamic Dns

    WEBSHARE 243WM E.G. 3.6.3.7.2 Dynamic DNS The Dynamic DNS function lets you alias a dynamic IP address to a static hostname, so if your ISP does not assign you a static IP address you can still use a domain name. This is especially useful for hosting servers via your ADSL connection, so that anyone wishing to connect to you may use your domain name, rather than having to use your dynamic IP address, which changes from time to time.

  • Page 78: Vlan

    The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname. This dynamic IP address is the WAN IP address. For example, to use the service, you must first apply for an account from this free Web server http://www.dyndns.org/. There are more than 8 DDNS servers supported.

  • Page 79: Device Management

    WEBSHARE 243WM Group individual ports into a small “Virtual” network of their own to be independent of the other ports. To add a VLAN group check on the port to be a member to this VLAN Group, and press “Apply” button to execute the setting. 3.6.3.7.4 Device Management The Device Management advanced configuration settings allow you to control your router’s security options and device monitoring features.
  • Page 80 Embedded Web Server: HTTP Port: This is the port number the router’s embedded web server (for web-based configuration) will use. The default value is the standard HTTP port, 80. Users may specify an alternative if, for example, they are running a web server on a PC within their LAN. For Example: User A changes HTTP port number to 8081.

  • Page 81: Igmp

    Traps supported: Cold Start, Authentication Failure. The following MIBs are supported: • RFC 1213 (MIB-II): System group Interfaces group Address Translation group IP group ICMP group TCP group UDP group EGP (not applicable) Transmission SNMP group • RFC1650 (EtherLike-MIB): dot3Stats •...

  • Page 82: Save Config

    WEBSHARE 243WM The WebShare 243WM Wireless supports both IGMP version 1 (IGMP-v1) and IGMP version 2 (IGMP-v2). At start up, the WebShare 243WM Wireless queries all directly connected networks to gather group membership. After that, the WebShare 243WM Wireless periodically updates this information. IP multicasting can be enabled/disabled on the ADSL Router LAN and/or WAN interfaces in the web configurator (LAN;...

  • Page 83: Chapter 4

    If the Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your service provider. This could save you time and effort but if the symptoms persist, then consult your service provider. Problems Starting Up the ADSL Router Problem None of the LEDs are on when you turn on...
  • Page 84 WEBSHARE 243WM...

  • Page 85: Appendix A

    WEBSHARE 243WM APPENDIX A Traffic Shaping Traffic Shaping is an agreement between the carrier and the subscriber to regulate the average rate and “burstiness” or fluctuation of data transmission over an ATM network. This agreement helps eliminate congestion, which is important for transmission of real time data such as audio and video connections.

  • Page 86: Appendix B

    Technical Features Protocols LAN port WAN port Antenna External buttons LED Indicators Wireless Standard ADSL Compliance ANSI T1.413 Issue 2, ITU-T G.992.1(Full Rate DMT), ITU- Protocols ADSL Firewall VLAN Input Power Power Consumption Agency and Regulatory Dimensions Weight Operating Temperature Storage Temperature Operating Humidity IP, NAT, ARP, ICMP, IGMP,...

  • Page 87: Appendix C

    Firmware Recovery The detail instruction in Emergency/Failure Recovery Button 1. Recovery procedures for non-working routers (e.g. after a failed firmware upgrade flash): Hold the Emergency/Failure Recovery Button on the back of the modem in. Keep this button held in and turn on the modem. Once the lights on the modem have stopped flashing, release the Emergency/Failure Recovery Button.

  • Page 88: Appendix D

    If you have any problems with the WebShare 243WM Wireless , please consult this manual. If you continue to have problems you should contact the dealer where you bought this ADSL Router. If you have any other questions you can contact the Atlantis Land company directly at the following address:...

This manual is also suitable for:

A02-ra243-w54m_me01Webshare 243wm

Table of Contents

Save PDF