Atlantis Land A02-RA144-W300N User Manual page 49

RTS/CTS
Threshold
Fragmentation
Threshold
DTIM
Wireless Mode
Label
Channel
Bandwidth
Guard Interval:
MCS
Label Description
Default SSID index is "1".
SSID Index
The SSID is the unique name of a wireless access point (AP) to
Broacast
be distinguished from another. For security propose, change
SSSID
the default wlan-ap to a unique ID name to the AP which is
already built-in to the router's wireless interface. It is case
sensitive and must not excess 32 characters. Make sure your
a packet broadcast by the Router to synchronize the wireless
network.
The RTS (Request To Send) threshold (number of bytes) for
enabling RTS/CTS handshake. Data with its frame size larger
than this value will perform the RTS/CTS handshake. Setting
this attribute to be larger than the maximum MSDU (MAC
service data unit) size turns off the RTS/CTS handshake.
Setting this attribute to zero turns on the RTS/CTS handshake
Enter a value between 1500 and 2347.
The threshold (number of bytes) for the fragmentation
boundary for directed messages. It is the maximum data
fragment size that can be sent.
Enter a value between 256 and 2346.
This value, between 1 and 255, indicates the interval of the
Delivery Traffic Indication Message (DTIM).
The default setting is 802.11b+g+n (Mixed mode). If you do
not know or have both 11g and 11b devices in your network,
then keep the default in mixed mode. From the drop-down
manual, you can select 802.11g if you have only 11g card. If
you have only 11b card, then select 802.11b and if you only
have 802.11n then select 802.11n.
11n Settings
Description
Select either 20 MHz or 20/40 MHz for the channel bandwidth.
The higher the bandwidth the better the performance will be.
Select either 400nsec or 800nsec for the guard interval. The
guard interval is here to ensure that data transmission do not
interfere with each other, it also prevents propagation delays,
echoing and reflections.
There are options 0~15 and AUTO to select for the
Modulation and Coding Scheme. We recommend users
selecting AUTO.
SSIDs Settings
A02-RA144-W300N
WebShare 144WN
Pag. 39