Atlantis Land A02-RA144-W300N User Manual page 71

Direction
IP FILTER RULE EDITING:
Field
Ip Filter Rule
Index
Active
Source
Address
Subnet Mask
Source Port
Number
Destination
Address
Subnet Mask
Protocol
Rule Unmatched
IP FILTER LIST:
Field
#
Active
Source IP Mask
Destination
Mask
Source port
Destination Port
Select the access to the Internet ("Outgoing") or from
the Internet ("Incoming").or Both
Meaning
This is item number
Select Yes from the drop down list box to enable IP filter
rule
The source IP address or range of packets to be
IP
monitored
It is the destination IP addresses based on above
destination subnet IP
This Port or Port Ranges defines the port allowed to be
used by the Remote/WAN to connect to the application.
Default is set from range 0 ~ 65535. It is recommended
that this option be configured by an advanced user
This is the destination subnet IP address
IP
It is the destination IP addresses based on above
destination subnet IP
It is the packet protocol type used by the application,
select either TCP or UDP or ICMP
Select action for the traffic unmatching current rule;
Forward to leave it pass through, and NEXT to check it by
the next rule
Meaning
Item number
Whether the connection is currently activ
The source IP address or range of packets to be
monitored
This is the destination subnet IP address
IP
This Port or Port Ranges defines the port allowed to be
used by the Remote/WAN to connect to the application.
Default is set from range 0 ~ 65535. It is recommended
that this option be configured by an advanced user
This is the Port or Port Ranges that defines the application
A02-RA144-W300N
WebShare 144WN
Pag. 61