System Setup; General Setup Page - Hyundai DV2H378DU User Manual

1 GENERAL SETUP PAGE

1.1 TV DISPLAY
If the unit is connected to a conventional TV set, you are supposed to select 4:3 PANSCAN or
4:3 LETTERBOX.
The 4:3 image will be displayed in full screen in its native aspect ratio.
4:3 PANSCAN: The wide-screen image will be displayed on the screen in its native aspect ratio
with some part on
the left and right cut off.
4:3 LETTERBOX: The wide-screen image will be displayed in its native aspect ratio with black
bands on the upper and lower sections of the screen.
If the unit is connected to a wide-screen TV set, you are supposed to select 16:9 or WIDE
SQUEEZE.
16:9: The wide-screen image will be displayed in full screen in its native aspect ratio while the
4:3 image will be stretched out horizontally to fit in the screen.
wIDE SQUEEzE The wide-screen image will be displayed in full screen in its native aspect ratio
and so does the 4:3 image but with black borders on the left and the right side.
1.2 ANGLE MARK
Set this item to ON. When a disc encoded with multiple camera angles is playing, the angle
mark will display on the screen. Then you can view the video of different camera angles by
pressing [ANGLE] on the remote control.
Set this item to OFF to disable this function.
NOTE: This function only works with those discs encoded with multiple camera angles.
1.3 OSD LANGUAGE (ON-SCREEN DISPLAY LANGUAGE )
Set the on-screen display language in this item.
1.4 CLOSED CAPTIONS
Set this item to ON. When a disc encoded with closed captions, the closed captions will be
shown on the screen.
Set this item to OFF to hide it.
You can also press [SUBTITLE] on the remote control to show or hide the closed captions.
NOTE: This function only works with those discs encoded with closed captions.
1.5 SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is paused, stopped
etc, for several minutes, a screen saver will appear on the screen. You can press any key or
button except [STANDBY] and [POWER] to wake it up.
OFF: Disable the screen saver function.
1.6 LAST MEMORY
ON: During a playback or in the paused/stopped status each time you open the disc tray or turn
off the player, the unit will memorize the last playback time. Next time when you insert the same
disc and close the disc tray to load the disc, the unit will play from the memorized point.
OFF: Disable the last memory function.
EN - 64