Basic Installation Of The Device; Connections; Urmet Nvm Plus Device Configuration - urmet domus 1093-111 Quick Manual

3

BASIC INSTALLATION OF THE DEVICE

In order to obtain a quick installation, follow the indicated steps:
3.1

CONNECTIONS

Connect the network cable to the port ③.
Switch on the device inserting the power connector inside the plug and position the switch on position 1.
NOTE
For more detailed information about the devices, refer to the full instruction manual inside the CD provided with the product.
4

URMET NVM PLUS DEVICE CONFIGURATION

Install the Urmet NVM PLUS Client Software on PC. For more details please, refer to Urmet NVM PLUS user manual
instructions in order to install it.
After installation, launch the Urmet NVM PLUS Client Software. Before any operations, user needs to add device and configure
it. Click to enter the configure mode, and then click
Area
DS1093-072
Description
List Area
Group/Short key Area
to manage the device.
Area
18
Description
Configuration Buttons
Navigation Bar