Table of Contents
Advertisement
1. Turn the first and second ball valves to the off position.
2. Open spigot to relieve pressure from
3. Open Pot Feeder and close spigot.
4. Carefully clean the feeder tube with a pipe cleaner.
5. Add Chlorine Pellets to Pot Feeder.
(SEE PAGE 29 FOR LIST OF MANUFACTURERS)
WARNING!!
6. Close Pot Feeder turn ball valve back to the open position.
7. You will need to add chlorine to the system once every 2 to 3 months.
8. The system will manually backwash itself clean. If you find that the system is not
producing enough clean water, then set the 'regen' pins to regenerate more often.
9. If the
PURE TECH 250
bucket and mix 3 parts water with 1 part Muriatic acid.
10. Soak JUST the
solution.
11. Thoroughly rinse
12. Install the
PURE TECH 250
chlorine.
Tech Support: 1-888-989-7873
Maintaining Your System
Do not mix brands of chlorine. Mixing brands may cause an explosion.
clogs, you may need to clean it. To do so, use a 5 gallon
PURE TECH 250
for 15 minutes. DO NOT put lid or o-rings in the
PURE TECH 250
back in line and let run for 20 minutes before adding
PURE TECH 250
Chlorine Pot Feeder.
in clean water.
PURE WATER TREATMENT, INC.
Page 12
Advertisement
Table of Contents
