Look in your service manual, for your particular model Fleck valve, and manually run
1.
your valve through a backwash cycle. To do this, simply turn the manual "Regen" dial
clockwise just a few "clicks" at a time, stopping at each setting for a minute, to clear
the air out of the system and valve. Once you have completed turning the "Regen"
knob one complete revolution and it is set back to the "Service" position, the system
is now ready for use!
Finally, plug the valve in the electrical outlet and set the current time of day. Our sys-
2.
tems will regenerate around 2:00am.
Check all connections for leaks.
3.
4. You are now ready to experience PURE WATER!
Don't forget to tell your friends, family and neighbors about how excellent the
PURE TECH 2500
• Even though you now have
heater is still full of raw water. Through normal use, this water will be replaced with
clean water in about 2 to 3 days.
• We supply a toll free number (888-989-7873), to all of our customers to use, in case
they don't understand something contained in our installation instructions.
• Hard copper pipe generally comes in two types. Use the thicker "L" type copper pipe
rather than thinner "M" type copper pipe.
• Follow your local plumbing and building codes when installing our systems.
• Please Email us a picture of your installed system!! Let us see how good of a job you
did on the installation.
Tech Support: 1-888-989-7873
Post Installation
works for you.
Information Notes
PURE WATER
PureWT@aol.com
in your cold water lines, your water
PURE WATER TREATMENT, INC.
Page 11