Physical Description; Front And Back Panel Configuration; Fs728Ts Front And Back Panels - NETGEAR FS700TS Hardware Installation Manual

This chapter describes the NETGEAR Smart Switch hardware features. The topics include:
•

"FS728TS Front and Back Panels"

• "FS752TS Front and Back Panels"
• "FS752TPS Front and Back Panels"
• "LED Designations"
• "Device Hardware Interfaces"

Front and Back Panel Configuration

FS728TS Front and Back Panels
The NETGEAR FS728TS Smart Switch is a 24/48-Port 10/100M + 4-Port 10/100/1000M smart
stackable switch, with each RJ45 port capable of sensing the line speed and negotiating the
operation duplex mode with the link partner automatically. Two SFP slots are also included for
SFP modules.
Figure 3-1 illustrates the NETGEAR FS728TS Smart Switch front panel:
Figure 3-1
The front panel contains the following:
• 24 RJ-45 connectors for 10/100 Ethernet switching ports.
• 4 RJ-45 connectors for 10BASE-T, 100Base-TX and 1000BASE-T.
• Two SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M SFP.
• Reset button to restart the device.

Physical Description

v1.0, September 2007
Chapter 3
3-19