Switch Features - NETGEAR FS700TS Hardware Installation Manual

FS700TS Hardware Installation Guide
Figure 1-1

Switch Features

The following list identifies the key features of the NETGEAR Smart Switch.
• 24/48 RJ-45 10/100 auto-sensing Giga switching ports.
• 2-Port 10/100/1000M auto sensing Gigabit Ethernet switching ports. These ports are reserved
for stacking units together, but can be configured as user ports.
• Two Small Form-factor Pluggable (SFP) GBIC slots, which function as combo ports. Combo
ports are single ports with two physical connections, SFP fiber and RJ-45 copper. The RJ-45
copper ports corresponding to the Combo ports are the four 10/100/1000M auto-sensing Giga
switching ports on each device. If both devices are plugged in, the fiber connection is active,
with fiber port taking priority if both are connected.
1-15
v1.0, September 2007
Introduction