Fs752Tps Front And Back Panels - NETGEAR FS700TS Hardware Installation Manual

FS700TS Hardware Installation Guide
• System LEDs
Figure 3-4 illustrates the NETGEAR FS752TS Smart Switches back panel:
Figure 3-4
The back panel contains the following:
• A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for
accommodating the supplied power cord.

FS752TPS Front and Back Panels

The NETGEAR FS752TPS Smart Switch is a 48-Port 10/100M + 4-Port 10/100/1000M smart
stackable switch, with each RJ45 ports capable of sensing the line speed and negotiating the
operation duplex mode with the link partner automatically. The device also offers 24-PoE enabled
ports.
Figure 3-5 illustrates the NETGEAR FS752TPS Smart Switch front panel:
Figure 3-5
The front panel contains the following:
• 48 RJ-45 connectors for 10BASE-T, and 100BASE-TX. On the FS752TPS, ports 1-24 are PoE
ports. Ports 25-48 are regular fast ports.
• 4 RJ-45 connectors for 10BASE-T, 100Base-TX and 1000BASE-T.
• Two SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M SFP.
• Reset button to restart the device.
• Recessed default reset button to restore the device back to the factory defaults.
• Port LEDS
• System LEDs
3-21
v1.0, September 2007
Physical Description